Just finished build - Display problems

What res are you trying to run at, You might be running above the max res of the tv.

Whats the make / model of the TV?
 
Are you connecting PC to TV before you turn the PC on?
I had display problems also while connecting after PC was turned on.Connected them together via HDMI before turning PC on sorted the problem.
 
I'll try that Saint

I've tried pretty much every resolution possible but was aiming for 1900x. Tried knocking it to 60

It's a "Toshiba 22KV500 22" LCD HD Ready TV"
Click to expand...

That TV only supports 720p, just so you know. 1280x720 is the res you are after. :)
 
Do something with the 8pin ATX cable.

Can you get it behind the motherboard and then come down from the top?
 
The PSU can be facing downwards unless on carpet?

This will get the main cables closer to the back of the motherboard.

Send the cables up the rear of the motherboard tray and then bring them in through the holes where they need to be.

Z9plus_02.jpg
 
stulid said:
The PSU can be facing downwards unless on carpet?

This will get the main cables closer to the back of the motherboard.

Send the cables up the rear of the motherboard tray and then bring them in through the holes where they need to be.

Z9plus_02.jpg
Click to expand...

I`ve got mine fan down and there`s no way to reach socket over the GPU. And the cables not long enough to go round back of mobo. Had to get extension, same length as cable 16".
 
run it at 1366*720 not 1280*720, or 1356/65/63 whatever res it pick it up as, and pick the closest to your actual tv res of 1366*720. Anything else will mean the tv is adding in lines of extra pixels and make text weird and difficult to read :(
 
You must log in or register to reply here.
Back
Top Bottom