Just forget my password
- Thread starter Jigga
- Start date
Use this - http://ebcd.pcministry.com/
Soldato
Press F8 repeatedly on boot.. select safe mode, then select XP Home/Pro... logon as Administrator.
Control Panel>User Accounts> remove password.
Good luck.
Control Panel>User Accounts> remove password.
Good luck.
Jigga said:so no one can help me
I dunno, people generally only start getting help in this forum when they make 10 consecutive posts in 10 minutes detailing how angry they are that they aren't getting free support replies within minutes. That gets results, I tell you.
Man of Honour
If nothing else works download and burn ubcd and use the account password remover
i never posted this
http://www.openwall.com/john
http://www.loginrecovery.com/
A third method might be to install a parallel operating system on a different partition on the same computer, then use a simple trick to gain access to the old system
The LOGON.SCR trick
Install an alternate copy of Windows NT or Windows 2000.
You must install this instance of NT/2000 on a different folder than WINNT, otherwise you'll end up with the same bad situation. Use ALTWINNT for example.
It is best that you install the alternate instance of the OS into a different partition than the one you have your original installation. You'll delete this folder anyway, and it's best that you just format that partition after you're done. Formatting the partition will be much easier than deleting individual files and folders.
Also, if you lost your password on NT - install a new instance of NT, not Windows 2000, as doing so will ruin your old NT installation (because of the difference between the NTFS versions). Same goes for W2K, XP and Windows Server 2003. Always install the same OS.
Boot the alternate install.
Use Control Panel/System/Startup (for NT) or Control Panel/System/Advanced/Startup and Recovery for W2K to change the default boot instance back to your original install.
Lamer note: If you don't do that you'll end up booting into the alternate installation next time you turn on your computer. You don't want that, do you?
Open Explorer. Browse to your original Windows NT/2000 folder, navigate to the %systemroot%\System32 sub-folder.
Lamer note: %systemroot% is a system variable used to point to the folder where NT/2000 is installed, usually \WINNT in NT/2000, or \WINDOWS in XP/2003.
Save a copy of LOGON.SCR, the default logon screen saver, anywhere you like. Just remember where you've placed it. You can also just rename the file to something you'll remember later, I user LOGON.SC1.
Lamer note: To rename a file use the REN command in the Command Prompt window, or just select the file in Windows Explorer and press F2.
Delete the original LOGON.SCR from the %systemroot%\System32 sub-folder. It is not necessary to delete the file if you renamed it, you can leave it there.
Note: You might not be able to delete the LOGON.SCR file because of permission settings. Regular users can only read and execute the file, not delete it. If that is the case (and it is in W2K, XP and Windows Server 2003) then you need to take ownership of the file and give the EVERYONE group FULL CONTROL permissions.
Lamer note: In order to take ownership of a file right-click it, select Properties, select the Security tab, click Advanced, and then click on the Owner tab. Select one of the users found in the list, click ok all the way out.
In order to change the LOGON.SCR permissions follow the previous instructions, in the Security tab click Add and browse to the Everyone group. Add it and make sure you give it Full Control. Click Ok all the way out.
Make a copy CMD.EXE in the %systemroot%\System32 sub-folder. CMD.EXE is located in %systemroot%\system32.
Lamer note: In order to copy a file via GUI, select the file, right-click and chose Copy, then go to the destination folder, right click the folder name and select Paste. You can also use the keyboard by typing CTRL-C to Copy, CTRL-V to Paste.
Rename the copy of CMD.EXE to LOGON.SCR.
Lamer note: See step #5.
Shutdown and restart your computer. Boot into the original install.
Wait for the logon screen saver to initiate - around 15 minutes. Oh, and no, do NOT move your mouse while you wait, duh...
After the screensaver is initiated, instead of running the normal LOGON.SRC actual screensaver, it will run the renamed CMD.EXE file (which is now called LOGON.SCR), and will actually open a CMD prompt in the context of the local system account.
In step #7 you could have used EXPLORER.EXE instead of CMD.EXE, and in that case a My Computer window will pop up.
Note: As noted earlier on this page, there is a way to make the wait time shorter, but you'll need to dig into the Registry for that.
Open the CMD.EXE prompt (it should already be opened if you've used CMD.EXE in step #7) and type:
net user administrator 123456
This will reset the local administrator (or domain admin if you are doing this trick on a DC) password to 123456.
Lamer note: You can, of course, use ANY password you want...
Delete the LOGON.SCR from %systemroot%\System32.
Rename the saved default screen saver from step 5 back to LOGON.SCR.
If you wish to remove the alternate install:
Delete its' folder.
ATTRIB -R -S -H c:\BOOT.INI
Edit c:\BOOT.INI and remove the alternate install's entries.
If you've used a different partition to install the alternate install then now you can simply delete or format that partition if you don't need it anymore, plus edit c:\BOOT.INI and remove the alternate installation entries.
This trick has been tested a zillion times. Don't bother to tell me it doesn't work, it does (for Windows NT and some versions of Windows 2000), and that's a fact.
Related articles
http://www.openwall.com/john
http://www.loginrecovery.com/
A third method might be to install a parallel operating system on a different partition on the same computer, then use a simple trick to gain access to the old system
The LOGON.SCR trick
Install an alternate copy of Windows NT or Windows 2000.
You must install this instance of NT/2000 on a different folder than WINNT, otherwise you'll end up with the same bad situation. Use ALTWINNT for example.
It is best that you install the alternate instance of the OS into a different partition than the one you have your original installation. You'll delete this folder anyway, and it's best that you just format that partition after you're done. Formatting the partition will be much easier than deleting individual files and folders.
Also, if you lost your password on NT - install a new instance of NT, not Windows 2000, as doing so will ruin your old NT installation (because of the difference between the NTFS versions). Same goes for W2K, XP and Windows Server 2003. Always install the same OS.
Boot the alternate install.
Use Control Panel/System/Startup (for NT) or Control Panel/System/Advanced/Startup and Recovery for W2K to change the default boot instance back to your original install.
Lamer note: If you don't do that you'll end up booting into the alternate installation next time you turn on your computer. You don't want that, do you?
Open Explorer. Browse to your original Windows NT/2000 folder, navigate to the %systemroot%\System32 sub-folder.
Lamer note: %systemroot% is a system variable used to point to the folder where NT/2000 is installed, usually \WINNT in NT/2000, or \WINDOWS in XP/2003.
Save a copy of LOGON.SCR, the default logon screen saver, anywhere you like. Just remember where you've placed it. You can also just rename the file to something you'll remember later, I user LOGON.SC1.
Lamer note: To rename a file use the REN command in the Command Prompt window, or just select the file in Windows Explorer and press F2.
Delete the original LOGON.SCR from the %systemroot%\System32 sub-folder. It is not necessary to delete the file if you renamed it, you can leave it there.
Note: You might not be able to delete the LOGON.SCR file because of permission settings. Regular users can only read and execute the file, not delete it. If that is the case (and it is in W2K, XP and Windows Server 2003) then you need to take ownership of the file and give the EVERYONE group FULL CONTROL permissions.
Lamer note: In order to take ownership of a file right-click it, select Properties, select the Security tab, click Advanced, and then click on the Owner tab. Select one of the users found in the list, click ok all the way out.
In order to change the LOGON.SCR permissions follow the previous instructions, in the Security tab click Add and browse to the Everyone group. Add it and make sure you give it Full Control. Click Ok all the way out.
Make a copy CMD.EXE in the %systemroot%\System32 sub-folder. CMD.EXE is located in %systemroot%\system32.
Lamer note: In order to copy a file via GUI, select the file, right-click and chose Copy, then go to the destination folder, right click the folder name and select Paste. You can also use the keyboard by typing CTRL-C to Copy, CTRL-V to Paste.
Rename the copy of CMD.EXE to LOGON.SCR.
Lamer note: See step #5.
Shutdown and restart your computer. Boot into the original install.
Wait for the logon screen saver to initiate - around 15 minutes. Oh, and no, do NOT move your mouse while you wait, duh...
After the screensaver is initiated, instead of running the normal LOGON.SRC actual screensaver, it will run the renamed CMD.EXE file (which is now called LOGON.SCR), and will actually open a CMD prompt in the context of the local system account.
In step #7 you could have used EXPLORER.EXE instead of CMD.EXE, and in that case a My Computer window will pop up.
Note: As noted earlier on this page, there is a way to make the wait time shorter, but you'll need to dig into the Registry for that.
Open the CMD.EXE prompt (it should already be opened if you've used CMD.EXE in step #7) and type:
net user administrator 123456
This will reset the local administrator (or domain admin if you are doing this trick on a DC) password to 123456.
Lamer note: You can, of course, use ANY password you want...
Delete the LOGON.SCR from %systemroot%\System32.
Rename the saved default screen saver from step 5 back to LOGON.SCR.
If you wish to remove the alternate install:
Delete its' folder.
ATTRIB -R -S -H c:\BOOT.INI
Edit c:\BOOT.INI and remove the alternate install's entries.
If you've used a different partition to install the alternate install then now you can simply delete or format that partition if you don't need it anymore, plus edit c:\BOOT.INI and remove the alternate installation entries.
This trick has been tested a zillion times. Don't bother to tell me it doesn't work, it does (for Windows NT and some versions of Windows 2000), and that's a fact.
Related articles
Last edited:
How to create the password reset disk
The steps to perform this task differ depending on whether your computer is a member of a network domain or is part of a workgroup (or is a stand-alone computer).
If you're using Windows XP in a workgroup (and not in a domain), you have the option to create a password reset disk.
To create the password reset disk go to the Start menu, Control Panel, User Accounts.
Click your account name.
Under Related Tasks located on the left side of the window, click Prevent a forgotten password.
In the Forgotten Password Wizard, follow the instructions as they appear on the screen.
When the wizard starts, click Next.
Select the drive that contains the media you want to create the information on (you can use a diskette or a Zip disk), and click Next.
Type your current password, and click Next.
Click Finish.
The password reset disk contains only one file called userkey.psw, which is an encrypted version of your password. If you change your password, the password reset disk is useless, you must repeat this procedure.
How to use the password reset disk
If you made a password reset disk for your local user account through the Forgotten Password Wizard, you can use it to access the computer, even if you have forgotten your password. The following steps will only work if you are in a workgroup environment, using the Welcome screen.
At the Welcome screen, click your user name, and then type your password. If you have forgotten your password, the Did you forget your password message is displayed.
Click use your password reset disk to start the Password Reset Wizard.
Follow the instructions in the Password Reset Wizard to create a new password.
Log on with the new password, and then store your password reset disk in a safe place in case you need it to reset your password in the future. You do not need to make a new password reset disk.
The steps to perform this task differ depending on whether your computer is a member of a network domain or is part of a workgroup (or is a stand-alone computer).
If you're using Windows XP in a workgroup (and not in a domain), you have the option to create a password reset disk.
To create the password reset disk go to the Start menu, Control Panel, User Accounts.
Click your account name.
Under Related Tasks located on the left side of the window, click Prevent a forgotten password.
In the Forgotten Password Wizard, follow the instructions as they appear on the screen.
When the wizard starts, click Next.
Select the drive that contains the media you want to create the information on (you can use a diskette or a Zip disk), and click Next.
Type your current password, and click Next.
Click Finish.
The password reset disk contains only one file called userkey.psw, which is an encrypted version of your password. If you change your password, the password reset disk is useless, you must repeat this procedure.
How to use the password reset disk
If you made a password reset disk for your local user account through the Forgotten Password Wizard, you can use it to access the computer, even if you have forgotten your password. The following steps will only work if you are in a workgroup environment, using the Welcome screen.
At the Welcome screen, click your user name, and then type your password. If you have forgotten your password, the Did you forget your password message is displayed.
Click use your password reset disk to start the Password Reset Wizard.
Follow the instructions in the Password Reset Wizard to create a new password.
Log on with the new password, and then store your password reset disk in a safe place in case you need it to reset your password in the future. You do not need to make a new password reset disk.