I cant wait for it to arrive. got it off AliExpress, no idea if you guys are going to stock it ?
Only thing is the shipping was almost as much as the case which kinda sucks.
Just counting the days until it arrives.
Will include pictures once it arrives and i start my build.
● Main body size 370mm*186mm* 295mm (length * width * height, excluding handles/foot pads and other protrusions), only about 20L in volume ● The
outer frame is integrated and bent, and the plate thickness is up to 2mm / Equipped with a detachable portable handle
● Compatible with 60mm thickness (30mm cold Exhaust + fan) Performance-level 240 water-cooled or 164mm (Intel CPU) or 163mm (AMD CPU) dual-tower air-cooled radiator
● Supports limited-length 363mm high-performance graphics cards & full-size Micro-ATX motherboards
● Supports at least 15cm length in air-cooling mode ATX power supply, water-cooling mode supports at least 14cm length ATX power supply
● Optimized installation experience design: flexible and changeable hardware combinations in a small space
Supplemented by large-area exquisite square openings,
● The installation/disassembly operation of the handle is not affected by the internal hardware assembly and can be switched at any time.
The main body size is 370mm*186mm*295mm (depth/width/height, excluding handles/foot pads and other protrusions), and is compatible with full-size MATX motherboards and long graphics cards with an approximate ITX chassis size.
In view of the actual installation situation where large-size graphics cards are difficult to put into the box, the PCI-E position detachable fixing strip is specifically designed. By forming an unobstructed opening design, long graphics cards (when the length is ⩼345mm) can be directly inserted and installed as a whole. , without the need for complicated case disassembly first.
To alleviate the sagging of the front end of a long graphics card due to gravity, it can be selected according to the actual hardware configuration.
With the top 12cm x2 or 14cm x2 fan and the rear 12cm fan, the CPU heat can be quickly discharged.
The length of the power supply needs to be selected based on other hardware specifications. Usually even if a longer graphics card (≤363mm) is installed:
The SSD can be installed on the back, side or bottom, depending on other hardware configurations.
● HDD standard installation mode, compatible with the graphics card support bracket at the bottom and a single 12cm/14cm fan
● USB 3.2 Gen 1 Type-A 5Gbps
● The top and bottom can support the installation of up to dual 140mm fans
The main air inlets and outlets of the chassis are equipped with magnetic dust filters to isolate environmental dust to ensure long-term stable operation of the host.
● Carrying handle combination kit ● Graphics card support bracket combination kit ● 3.5-inch HDD mounting bracket ● Dual 2.5-inch SSD mounting bracket
Only thing is the shipping was almost as much as the case which kinda sucks.
Just counting the days until it arrives.
Will include pictures once it arrives and i start my build.
Z20 tempered glass version black
High performance hardware compatible/compact design
Building a compact desktop console is a lot of fun, but it also comes with a lot of trade-offs. While the size of the chassis is shrinking, conflicts such as compatibility/heat dissipation/installation experience are also gradually increasing. Therefore, only a small number of users with sufficient experience have clear construction ideas and assembly capabilities. In this regard, we are constantly thinking about how to optimize the design to maintain a compact hardware layout while improving internal hardware compatibility, and ultimately allow more users to experience the practicality and fun of the miniaturized models:● Main body size 370mm*186mm* 295mm (length * width * height, excluding handles/foot pads and other protrusions), only about 20L in volume ● The
outer frame is integrated and bent, and the plate thickness is up to 2mm / Equipped with a detachable portable handle
● Compatible with 60mm thickness (30mm cold Exhaust + fan) Performance-level 240 water-cooled or 164mm (Intel CPU) or 163mm (AMD CPU) dual-tower air-cooled radiator
● Supports limited-length 363mm high-performance graphics cards & full-size Micro-ATX motherboards
● Supports at least 15cm length in air-cooling mode ATX power supply, water-cooling mode supports at least 14cm length ATX power supply
● Optimized installation experience design: flexible and changeable hardware combinations in a small space
JONSPLUS Z20 product introduction
- Product Details
- Product Image
- Technical Parameters
- More videos
- Media comments
- Download
Compact & High Compatibility
Compact layout & high compatibility
Compatibility data overview
Radiator compatibility
● Water cooling: compatible with 30mm thick radiator (fan not included)
● Air cooling: 164mm (Intel CPU) or 163mm (AMD CPU) air cooling
GPU support length
363mm long graphics card storage space
ATX power supply length support
● Air cooling: ATX power supply supports a length of ≥150mm
● Water cooling: ATX power supply supports a length of ≥140mm
Yueran丨Desktop
Integrated bent steel plate with thickness up to 2mm (panel + top plate)
Supplemented by large-area exquisite square openings,
it meets both heat dissipation needs and craftsmanship.
2mm thickness removable handle for portability
● The installation/disassembly operation of the handle is not affected by the internal hardware assembly and can be switched at any time.
● The handle and the cabinet are connected and fastened through a screwless hook. There are no screw holes in the cabinet after disassembly to affect the appearance.
Only about 20L volume, place it as you like
Built with only about 20L volume, it can be easily placed in various desktop environments
The main body size is 370mm*186mm*295mm (depth/width/height, excluding handles/foot pads and other protrusions), and is compatible with full-size MATX motherboards and long graphics cards with an approximate ITX chassis size.
*Dimensions including handles/foot bases and other protrusions are: 382mm*198mm*335mm (depth/width/height)
Compatible with full-size Micro-ATX motherboards
Fully meet the needs of building high-performance hardware systems in small-volume chassis
Supports high-performance graphics cards up to 363mm long
The total space from the back panel to the bottom of the graphics card is 89mm. You can choose a compatible bottom fan according to the thickness of the graphics card (for example: with some graphics cards, the bottom may be compatible with 12015 specifications fans or no fan installed)
Innovative design: Removable PCI-E fixing piece optimizes the installation experience of long graphics cards
In view of the actual installation situation where large-size graphics cards are difficult to put into the box, the PCI-E position detachable fixing strip is specifically designed. By forming an unobstructed opening design, long graphics cards (when the length is ⩼345mm) can be directly inserted and installed as a whole. , without the need for complicated case disassembly first.
*Normal length graphics card installation does not require disassembly
Standard adjustable graphics card support bracket
To alleviate the sagging of the front end of a long graphics card due to gravity, it can be selected according to the actual hardware configuration.
When installing the graphics card bracket, the compatible hardware combinations at the bottom of the chassis are:
● 12cm
fan
Playable丨Ingredients
Supports 240 high-performance water cooling with radiator thickness ≤30mm
Installation can be completed by pulling out the bracket, effectively reducing the difficulty of hardware installation in small spaces. Through precise size setting, even a performance-grade 240 integrated water cooling with a thickness of 60mm (radiator + fan) can be installed inside the Z20.
Compatible with high-performance air-cooled tower radiators with a height of ≤164mm
With the top 12cm x2 or 14cm x2 fan and the rear 12cm fan, the CPU heat can be quickly discharged.
*When installing Intel CPU, the radiator height limit is 164mm; when installing AMD CPU, the radiator height limit is 163mm, please pay attention to the matching selection.
Various hardware combinations
Provides a high degree of freedom in system construction
Optional power supply installation mode
ATX power supply vertical mode
Supports 4-level height installation
SFX/SFX-L Power Supply Side Mount Mode
This mode has no interference with water cooling and graphics card hardware.
SFX/SFX-L power supply vertical mounting mode
Need to use the SFX to ATX adapter board in the accessory box
In the vertical installation mode of the ATX power supply, 4-level height lifting installation (P1~P4) can be selected to adapt to different hardware matching situations.
The length of the power supply needs to be selected based on other hardware specifications. Usually even if a longer graphics card (≤363mm) is installed:
1. When using an air-cooled CPU radiator, the power supply can be installed on the first level (P1), and the length of the power supply can at least support to 15cm
2. When using a water-cooled CPU radiator, the power supply can be installed on the second level (P2), and the power supply length can support at least 14cm.
For details, please refer to the compatibility table below for reasonable hardware planning.
Z20 Hardware Installation Compatibility Chart
Supports installation of 3 2.5-inch SSDs
The SSD can be installed on the back, side or bottom, depending on other hardware configurations.
In bottom installation mode, the bottom can be compatible with the graphics card support bracket and 12cm
fan
Supports bottom-mounted 3.5-inch HDD x1
● HDD standard installation mode, compatible with the graphics card support bracket at the bottom and a single 12cm/14cm fan
● HDD additional installation mode, compatible with dual 12cm fans installed at the bottom (not compatible with the graphics card support bracket)
Front I/O interface
● USB 3.2 Gen 1 Type-A 5Gbps
● Headphone & microphone composite audio port
● USB 3.2 Gen 2 Type-C 10Gbps+
Can be equipped with up to 5 cooling fans
● The top and bottom can support the installation of up to dual 140mm fans
● A 120mm fan can be installed at the rear (air-cooled CPU radiator status). If there is a conflict with the rear water-cooling pipe, a 92mm fan can be installed at the rear or no fan can be installed.
Through-type short air ducts maintain efficient operation of the system
The system fan cooperates with the large-area square mesh on the outside to form a through-type short air duct, which can quickly discharge the heat generated by the CPU and GPU inside the chassis.
Full coverage with magnetic dust filter
The main air inlets and outlets of the chassis are equipped with magnetic dust filters to isolate environmental dust to ensure long-term stable operation of the host.
*Rear dust filter, which can be used for rear fan for air intake (bringing extra cold airflow to the top cooling radiator to optimize CPU temperature) or rear fanless configuration
22mm depth dedicated back cable management channel (including 3 cable limit Velcro)
It is usually difficult to plan a reasonable cable management space in a compact chassis. The Z20 has dual cable management channels on the back, and additional cables can be limited and fixed with Velcro to relieve cable management anxiety.
Front I/O cable fixing Velcro
There are also 3 Velcro strips under the motherboard, which can be used to bind and organize the front I/O or fan cables.
Z20 accessories list
● Carrying handle combination kit ● Graphics card support bracket combination kit ● 3.5-inch HDD mounting bracket ● Dual 2.5-inch SSD mounting bracket
● Dust filter on the rear of the chassis ● SFX TO ATX power conversion bracket ● Screw box / user guide
