So it worked and then it stopped working.
Here is a video of it: https://youtu.be/HVFqpd1O8ok
I ran water through the pump to bleed any air out, but even after 10 minutes it seems to me that the stream coming out of the high pressure hose still has some air in as it is not a perfect flow and it sort of gurgles.
There is definitely power coming in because when I change the pressure level from the gun I can hear the usual mechanical noise coming from the washer, indicating pressure change.
Not sure what to do next. I left it with water running freely through it as I write this post, hopefully bleed all air out, but don't have high hopes it would work.
Any ideas?
Here is a video of it: https://youtu.be/HVFqpd1O8ok
I ran water through the pump to bleed any air out, but even after 10 minutes it seems to me that the stream coming out of the high pressure hose still has some air in as it is not a perfect flow and it sort of gurgles.
There is definitely power coming in because when I change the pressure level from the gun I can hear the usual mechanical noise coming from the washer, indicating pressure change.
Not sure what to do next. I left it with water running freely through it as I write this post, hopefully bleed all air out, but don't have high hopes it would work.
Any ideas?