Hi Guys
From today I will be listing Koolance product on the OcUK website.
Stock will be limited initially but will build up to a more complete range over time. I have started by listing the most requested product.
These lines are due to land in within the week and pricing is keen
I am sure you will agree, the quality of these products is incredible.
Koolance RP-402X2 Dual 5.25" Reservoir for 1 or 2 Laing DDC Pumps Rev.1.2 @ £109.99 inc VAT
From Koolance comes the newest development for the Laing DDC pump: A dual reservoir!
Koolance, one of the most well-known water cooling manufacturers form the US, has once again developed a product which is yet to be matched in design, performance and quality! Designed for mounting in two 5.25" drive bays this reservoir fits perfectly into the front of your water cooled PC. The great looks of this reservoir can be additionally underlined with up to six 3mm LEDs which light the coolant from the back of the reservoir.
From the performance side this reservoir offers the basis for one of the strongest water cooling pumps on the market! It is possible to use one or even two pumps with this unit. With a connector at the side of the reservoir the pumps can be used either for separate cooling loops or can be set for serial operation for maximum performance in one loop. This offers the possibility of maximum flow rates and speed, hence achieving cooling performance which would otherwise not be possible. To prevent air from being sucked in with all this power the inside of the reservoir is equipped with a special structure which deflects air bubbles, hence allowing pure coolant to be sucked in by the pumps. For filling the reservoir can simply be pulled out a bit from the drive bays and the fill opening screw plug can be removed for filling. The threaded filling opening also makes this reservoir perfect for implementation of a Fillport!
The materials used on this reservoir are a classic mix of Acetal, aluminium and acrylic in only the highest quality as always from Koolance. At the rear the reservoir is equipped with four G1/4" threaded connection openings which are marked as Inlets or Outlets. If only one pump is connected two of the openings can be sealed with the included screw plugs. The reservoir unit is mounted in the drive bays just like an optical drive with suitable mounting threads.
This Product can be used for Single and Dual Loop systems. If you wish to use a single loop, you can remove the blanking pate from the middle of the Res and fill the whole res with fluid.
Technical specifications:
Dimensions (LxWxH): 14,8cm x 12,6cm x 8,5cm
Capacity: 158ml
Weight: 1.4kg
LED holes: 4x 3mm
Extent of delivery:
Koolance RP-402X2 Dual 5.25" Reservoir for 1-2 PMP-400/S & Laing DDC Pumps
Please note: When mounting the DDC pumps the stands on the side may be in the way, simply remove them
Only £109.99 inc VAT.
ORDER NOW
Koolance RP-452X2 Dual 5.25" Reservoir for 1 or 2 D5 Pumps Rev 1.2 @ £99.98 inc VAT
From Koolance comes the newest development for the Laing D5 pump: A dual reservoir!
Koolance, one of the most well-known water cooling manufacturers form the US, has once again developed a product which is yet to be matched in design, performance and quality! Designed for mounting in two 5.25" drive bays this reservoir fits perfectly into the front of your water cooled PC. The great looks of this reservoir can be additionally underlined with up to six 3mm LEDs which light the coolant from the back of the reservoir.
From the performance side this reservoir offers the basis for one of the strongest water cooling pumps on the market! It is possible to use one or even two pumps with this unit. With a connector at the side of the reservoir the pumps can be used either for separate cooling loops or can be set for serial operation for maximum performance in one loop. This offers the possibility of maximum flow rates and speed, hence achieving cooling performance which would otherwise not be possible. To prevent air from being sucked in with all this power the inside of the reservoir is equipped with a special structure which deflects air bubbles, hence allowing pure coolant to be sucked in by the pumps. For filling the reservoir can simply be pulled out a bit from the drive bays and the fill opening screw plug can be removed for filling. The threaded filling opening also makes this reservoir perfect for implementation of a Fillport!
The materials used on this reservoir are a classic mix of Acetal, aluminium and acrylic in only the highest quality as always from Koolance. At the rear the reservoir is equipped with four G1/4" threaded connection openings which are marked as Inlets or Outlets. If only one pump is connected two of the openings can be sealed with the included screw plugs. The reservoir unit is mounted in the drive bays just like an optical drive with suitable mounting threads.
This Product can be used for Single and Dual Loop systems. If you wish to use a single loop, you can remove the blanking pate from the middle of the Res and fill the whole res with fluid.
Technical specifications:
Dimensions (LxWxH): 14,8cm x 13,6cm x 8,5cm
Capacity: 158ml
Weight: 1.2kg
LED holes: 4x 3mm
Extent of delivery:
Koolance RP-452X2 Dual 5.25" Reservoir for 1-2 PMP-450/S & D5 Pumps
Only £99.98 inc VAT.
ORDER NOW
Koolance CPU 370 CPU Waterblock @ £76.99 inc VAT
Koolance has now introduced their updated CPU water block!
More time in the water block means more heat can be absorbed. The cooling performance was optimized for the multi-core CPUs on the market. Made from copper and nickel-plated this waterblock features timeless and elegant looks. For the best possible contact the surface and cooling plate are polished to a mirror finish and the Koolance logo is laser-engraved into the top. Thanks to its universal mounts the water block can be used on many common CPU sockets. An additional back plate is included to reduce strain on the Mainboard and to allow greater contact pressures. A rubber sheet is inserted between Mainboard and Backplate to prevent possible shorts. G1/4" threads ensure maximum compatibility.
Update from the CPU-360 to the CPU-370:
The popular optical design was maintained, but the insides were redone! A finer fin structure and channel design in combination with a redesigned middle plate promise even better cooling performance than before, catapulting this water block even higher in the performance charts!
Compatible with the following sockets:
AMD AM2/AM2+/AM3
Intel LGA 775
Intel LGA 1155/1156
Intel LGA 2011
Intel LGA 1366
Technical specifications:
Material: Nickel plated copper
Thread size: 1/4"
Dimensions (LxWxH): 12.5cm x 12.5cm x 1.6cm
Weight: 411g
Extent of delivery:
Koolance CPU-370 (CPU)
Thermal compound
Illustrated English manual
Mounting material
Please note: The water bock is shipped without fittings. Please order fittings separately if needed.
Only £76.99 inc VAT.
ORDER NOW
From today I will be listing Koolance product on the OcUK website.
Stock will be limited initially but will build up to a more complete range over time. I have started by listing the most requested product.
These lines are due to land in within the week and pricing is keen
I am sure you will agree, the quality of these products is incredible.
Koolance RP-402X2 Dual 5.25" Reservoir for 1 or 2 Laing DDC Pumps Rev.1.2 @ £109.99 inc VAT
From Koolance comes the newest development for the Laing DDC pump: A dual reservoir!
Koolance, one of the most well-known water cooling manufacturers form the US, has once again developed a product which is yet to be matched in design, performance and quality! Designed for mounting in two 5.25" drive bays this reservoir fits perfectly into the front of your water cooled PC. The great looks of this reservoir can be additionally underlined with up to six 3mm LEDs which light the coolant from the back of the reservoir.
From the performance side this reservoir offers the basis for one of the strongest water cooling pumps on the market! It is possible to use one or even two pumps with this unit. With a connector at the side of the reservoir the pumps can be used either for separate cooling loops or can be set for serial operation for maximum performance in one loop. This offers the possibility of maximum flow rates and speed, hence achieving cooling performance which would otherwise not be possible. To prevent air from being sucked in with all this power the inside of the reservoir is equipped with a special structure which deflects air bubbles, hence allowing pure coolant to be sucked in by the pumps. For filling the reservoir can simply be pulled out a bit from the drive bays and the fill opening screw plug can be removed for filling. The threaded filling opening also makes this reservoir perfect for implementation of a Fillport!
The materials used on this reservoir are a classic mix of Acetal, aluminium and acrylic in only the highest quality as always from Koolance. At the rear the reservoir is equipped with four G1/4" threaded connection openings which are marked as Inlets or Outlets. If only one pump is connected two of the openings can be sealed with the included screw plugs. The reservoir unit is mounted in the drive bays just like an optical drive with suitable mounting threads.
This Product can be used for Single and Dual Loop systems. If you wish to use a single loop, you can remove the blanking pate from the middle of the Res and fill the whole res with fluid.
Technical specifications:
Dimensions (LxWxH): 14,8cm x 12,6cm x 8,5cm
Capacity: 158ml
Weight: 1.4kg
LED holes: 4x 3mm
Extent of delivery:
Koolance RP-402X2 Dual 5.25" Reservoir for 1-2 PMP-400/S & Laing DDC Pumps
Please note: When mounting the DDC pumps the stands on the side may be in the way, simply remove them
Only £109.99 inc VAT.
ORDER NOW
Koolance RP-452X2 Dual 5.25" Reservoir for 1 or 2 D5 Pumps Rev 1.2 @ £99.98 inc VAT
From Koolance comes the newest development for the Laing D5 pump: A dual reservoir!
Koolance, one of the most well-known water cooling manufacturers form the US, has once again developed a product which is yet to be matched in design, performance and quality! Designed for mounting in two 5.25" drive bays this reservoir fits perfectly into the front of your water cooled PC. The great looks of this reservoir can be additionally underlined with up to six 3mm LEDs which light the coolant from the back of the reservoir.
From the performance side this reservoir offers the basis for one of the strongest water cooling pumps on the market! It is possible to use one or even two pumps with this unit. With a connector at the side of the reservoir the pumps can be used either for separate cooling loops or can be set for serial operation for maximum performance in one loop. This offers the possibility of maximum flow rates and speed, hence achieving cooling performance which would otherwise not be possible. To prevent air from being sucked in with all this power the inside of the reservoir is equipped with a special structure which deflects air bubbles, hence allowing pure coolant to be sucked in by the pumps. For filling the reservoir can simply be pulled out a bit from the drive bays and the fill opening screw plug can be removed for filling. The threaded filling opening also makes this reservoir perfect for implementation of a Fillport!
The materials used on this reservoir are a classic mix of Acetal, aluminium and acrylic in only the highest quality as always from Koolance. At the rear the reservoir is equipped with four G1/4" threaded connection openings which are marked as Inlets or Outlets. If only one pump is connected two of the openings can be sealed with the included screw plugs. The reservoir unit is mounted in the drive bays just like an optical drive with suitable mounting threads.
This Product can be used for Single and Dual Loop systems. If you wish to use a single loop, you can remove the blanking pate from the middle of the Res and fill the whole res with fluid.
Technical specifications:
Dimensions (LxWxH): 14,8cm x 13,6cm x 8,5cm
Capacity: 158ml
Weight: 1.2kg
LED holes: 4x 3mm
Extent of delivery:
Koolance RP-452X2 Dual 5.25" Reservoir for 1-2 PMP-450/S & D5 Pumps
Only £99.98 inc VAT.
ORDER NOW
Koolance CPU 370 CPU Waterblock @ £76.99 inc VAT
Koolance has now introduced their updated CPU water block!
More time in the water block means more heat can be absorbed. The cooling performance was optimized for the multi-core CPUs on the market. Made from copper and nickel-plated this waterblock features timeless and elegant looks. For the best possible contact the surface and cooling plate are polished to a mirror finish and the Koolance logo is laser-engraved into the top. Thanks to its universal mounts the water block can be used on many common CPU sockets. An additional back plate is included to reduce strain on the Mainboard and to allow greater contact pressures. A rubber sheet is inserted between Mainboard and Backplate to prevent possible shorts. G1/4" threads ensure maximum compatibility.
Update from the CPU-360 to the CPU-370:
The popular optical design was maintained, but the insides were redone! A finer fin structure and channel design in combination with a redesigned middle plate promise even better cooling performance than before, catapulting this water block even higher in the performance charts!
Compatible with the following sockets:
AMD AM2/AM2+/AM3
Intel LGA 775
Intel LGA 1155/1156
Intel LGA 2011
Intel LGA 1366
Technical specifications:
Material: Nickel plated copper
Thread size: 1/4"
Dimensions (LxWxH): 12.5cm x 12.5cm x 1.6cm
Weight: 411g
Extent of delivery:
Koolance CPU-370 (CPU)
Thermal compound
Illustrated English manual
Mounting material
Please note: The water bock is shipped without fittings. Please order fittings separately if needed.
Only £76.99 inc VAT.
ORDER NOW
