lancool k58 problem

deadite66 · 7 Feb 2010 at 16:15

posted this in the custom support section but no reply so posting it here.

i got a new titan goliath setup friday and the case was shipped with a problem.

i have no idea why the system builder even touched it as nothing was using it or they found it like that when they opened the box and did nothing.
what's the best way to remove the screw?

deadite66 · 7 Feb 2010 at 16:22

i have 2mm of screw to play with and as you can see its a tight corner.

deadite66 · 7 Feb 2010 at 21:11

i have the back plate, funny thing is it wasn't inside the case but the motherboard box, no sign of the head of the screw.

also the power/hdd led plug wasn't connected i connected it and they still don't work.

the builder defiantly knew the case was defective, system is working fine though.

update: the hdd led plug was connected but not the power led which i plugged in the same way as the other connectors, i guess polarity isn't important for the reset/power buttons.

deadite66 · 8 Feb 2010 at 20:14

haven't tried anything yet, support suggested a small screwdriver and a hammer which i don't think is a good idea.

deadite66 · 8 Feb 2010 at 20:44

huh got the power/hdd leds working the builder plugged them in upside down, so just the screw problem left.

deadite66 · 8 Feb 2010 at 20:46