Lapmtron CW611 controller + PWM Pump ?

fat4l

fat4l

fat4l

Associate
Joined
16 Jan 2010
Posts
360
Hi guys. Is it possible to somehow regulate a PWM Pump(EK DDC) with this controller ?
Like to use some kind of adapter from molex(power for the pump) to 3 pin and then regulate just voltage ?
or is it better just to use PWM signal from the motherboard ?:confused:
 
It's rated for 36W per channel so if your pump is under that at least the rated power is ok.

You'd need to make sure you have enough gauge on your wiring to the fan header to allow for the maximum rating of the pump.

You'd also need to forget that you bought a PWM enabled pump, unless the PWM control gives you some undesireable effects, such as PWM kick or growl. I'd at least try the pump off the motherboard before exploring alternatives.

I
 
Tealc said:
It's rated for 36W per channel so if your pump is under that at least the rated power is ok.

You'd need to make sure you have enough gauge on your wiring to the fan header to allow for the maximum rating of the pump.

You'd also need to forget that you bought a PWM enabled pump, unless the PWM control gives you some undesireable effects, such as PWM kick or growl. I'd at least try the pump off the motherboard before exploring alternatives.

I
Click to expand...

Okay will do it from MB.

I just had a feeling like i wanna control everything via 1 controller hehe, but MB will do it ;)
 
If you want to do everything from one controller get an Aquearo, expensive but worth every penny imo.
Owned an AQ5 which i sold along with everything else, started up again and went through 3 fan controllers including the CW611, which is very good but its not an Aquearo, now i am on an AQ6 i will only replace it if it breaks and it will be for another.
 
Nickolp1974 said:
If you want to do everything from one controller get an Aquearo, expensive but worth every penny imo.
Owned an AQ5 which i sold along with everything else, started up again and went through 3 fan controllers including the CW611, which is very good but its not an Aquearo, now i am on an AQ6 i will only replace it if it breaks and it will be for another.
Click to expand...
was thinking about it but atm ive spent so much money on wc so i have to wait. CW611 will do the job for now :P
 
The lamptron is still excellent, a very good controller indeed. It was only because the AQ5 was the very first and all the rest were judged by it, and if i didn't have £100+ to blow on an AQ the CW611 would be top of my list.
 
I have gone through loads of fan controlers in my time, including using bios,aisuite. my first time with a aquaro 6. not been able to build it yet, all sitting in a box waiting for tubing, which atm is very very hard to get hold of.
 
You must log in or register to reply here.
Back
Top Bottom