Layout check

Cyanide · 6 Feb 2012 at 20:12

Hi guys!

First ever customer loop's just going in now so I though I'd better double check before I fill it up!

I've got it going pump > block > rad > res with a fair of fans pushing up through the rad as case exhausts.

How's this look?

p.s sorry for the lack of copper plexi

mjones1 · 6 Feb 2012 at 20:29

All looks fine here apart from the possible tubing kink going from cpu to rad.

RJC · 6 Feb 2012 at 20:29

Loop looks ok.

Cyanide · 6 Feb 2012 at 20:37

mjones1 said:
All looks fine here apart from the possible tubing kink going from cpu to rad.

It's just the photo, I've double checked there's no kinks in it

Cleeecooo · 6 Feb 2012 at 20:58

Cyanide said:
Hi guys!

First ever customer loop's just going in now so I though I'd better double check before I fill it up!

I've got it going pump > block > rad > res with a fair of fans pushing up through the rad as case exhausts.

How's this look?

http://img31.imageshack.us/img31/7373/dsc8454s.jpg[IMG]

p.s sorry for the lack of [COLOR="lime"][B]nickel!!!!![/B][/COLOR] plexi :p[/QUOTE]

So weher is the pump? is i wounted with the res?

If so, that's fine :)

iB CoMpL3XiTy · 6 Feb 2012 at 21:01

I'd still swap the inlet and outlet tubes for the rad just to make sure it never kinks, just being picky though.
Looks good

Cleeecooo · 6 Feb 2012 at 21:03

iB CoMpL3XiTy said:
I'd still swap the inlet and outlet tubes for the rad just to make sure it never kinks, just being picky though.
Looks good

Personally I think it looks epic

But as said, it does look like a single tap will kink it!

Cyanide · 6 Feb 2012 at 21:16

If I swapped the rad tubes over they'd cross over and it'd look messy

It's not going to kink, you've got to really twist it some more to get it restricting down and I've got no intention of even touching it once it's in

(it looks yellowish at the moment, that's because I can't be bothered to set my lighting kit up, maybe tomorrow when it's done

)

mjones1 · 6 Feb 2012 at 21:18

Oh from this camera angle it looks much better, update with your temps please?

Cyanide · 6 Feb 2012 at 21:24

mjones1 said:
Oh from this camera angle it looks much better, update with your temps please?

Will do tomorrow when it's all running, probably about 100,000,000C 'cuz I've got a Bulldozer under the block

Cyanide · 7 Feb 2012 at 18:20

39c at stock with IBT running, drops down to 30-32 idle

Abz Hussain · 7 Feb 2012 at 20:37

Cyanide said:
Hi guys!

First ever customer loop's just going in now so I though I'd better double check before I fill it up!

I've got it going pump > block > rad > res with a fair of fans pushing up through the rad as case exhausts.

How's this look?

p.s sorry for the lack of copper plexi

Is that effect in the tubes the tubes themselves or the liquid

zx|muppet · 7 Feb 2012 at 20:46

Abz Hussain said:
Is that effect in the tubes the tubes themselves or the liquid

at a guess i would think he just flushed the system out before using the decent stuff

Cyanide · 7 Feb 2012 at 21:24

It's condensation from where I dunked them in hot water to get a decent bend without risking them kinking