Lian Li O11D- Mini....(latest post with AIO Up top in ATX format)

[orbitalwalsh]

damn ... https://www.hardwareluxx.ru/index.p...-o11d-mini-lancool-ii-mesh-i-lancool-315.html

though personally think they should have ditched ATX support to trim some height off , wouldn't of fitted a 60mm thick rad up top but 45mm would have been plenty!

Spoiler: lovely images

from looking at it , SFX PSU chamber so 63.5mm Chamber vs 86mm for standard ATX PSU .
Houses a 120mm at the back so using the XL main chamber sizing leaves this roughly 265mm Wide so 10mm slimmer then standard Dynamic and 22.5mm slimmer then XL

Standard Dynamic Height is about 446mm , so knock off the 60mm clearance height in it for thick rads , Plus take away a PCI slot (18mm) as its now 7 vs 8 = rough height of 368mm odd in height

 

[orbitalwalsh]

Looks good, I wonder if it will have greater clearance for Air coolers and GPU's than the O11.

like the XL version, with 120mm fan at rear , means it'll be able to handle

CPU coolers up to a height of 167 mm

< taken from XL listing

standard Dynamic which could only manage 92mm fan is

CPU cooler that is up to 155 mm in height

key bit being having an AIB wider GPU with a waterblock , which is were the Dynamic failed unless you mounted vertically

 

[orbitalwalsh]

Was gonna buy the standard dynamic one but this will look much better on my desk. Any idea on release date?

gamernexus with it

that led screen

sfx psu might put people off. 550-750w versions cost 20-40% more then ATX versions

 

[orbitalwalsh]

another vid up. Case is opened up

 

[orbitalwalsh]

I do find myself wondering if the SFX PSU requirement was really necessary. They seem to have increased the size of the main chamber by roughly the difference in height between an SFX and ATX PSU...

I expect most would sooner buy a shorter CPU cooler or swap to an AIO than change PSU.

Chamber is same as XL to include 120mm fan which may/may not be needed .

Good vid, was seriously considering this as my next case but the vid says SFX PSU only! that's a killer for me. Can't justify a new PSU just for a case.

Humbug, always 2 steps forward and one step back for Lian Li.

So close to perfection but they just never quite get there.

The original ITX had SFX PSU, then they brought out another version with ATX PSU that had a solid front panel .

Looks like they are trying to hit everything as once .
Personally think the chamber size should have been same as standard Dynamic with 92mm fan but this wouldn't of allowed wider AIB cards with waterblocks as normal horizontal fitting

 

[orbitalwalsh]

Dang I was interested in this when I saw the reveal videos on some of the Youtuber's channels but the SFX PSU requirement has put me off.

Most SFX blow the water out of ATX for quality - mainly due to being so small they have to

 

[orbitalwalsh]

Another video

 

[orbitalwalsh]

Ive got everything I need except for the case and the PSU, I need to wait for 850w or 1000w PSU, whichever comes first, everything is supposed to release in Q2 2020.

Planning on going for this one: https://wccftech.com/cooler-master-unveils-a-850w-sfx-power-supply/

Or this one: https://www.overclock3d.net/news/so...1kw_sfx-l_power_supply_-_small_yet_powerful/1

@SilverStone Saku sure you guys have 1000w on the cards ?

*** One mentioned above.

Also sure you've got plat 850w unit ?

 

[orbitalwalsh]

Right now I have a Superflower 1000w Plat PSU, when I went onto a PSU calc the other day, it said minimum I needed was 750w, recommended 850w, if I want some freedom / headroom, id quite happily get the 1000w, SFX-L PSU, I just need to make sure it fits fist, theres no dimensions out for the case (Internals) or the PSU's yet that ive found, im running things like a Radeon 7, 3900x, MSI Ace, 32gb G.Skill Ram, high end sound card, 3 nvme, 2 SSD, water pump, about 9 led fans, 2 led strips etc etc

plat/Titanium rating 750w would be fine ! gold then could understand 1000w . Guessing you've got 2080ti ?

Nvidia drop to 7nm this year should drop power draw quite a nit! 12nm from Turing still fancy 16nm . Bit Like Zen+ over Zen CPU design

800w Titanium rating, which is higher then Plat <<< plenty

https://www.silverstonetek.com/product.php?pid=731&bno=22&tb=14&area=en

 

[orbitalwalsh]

Yes I've seen the 800w, also seen the 1000w at CES2020, do you know if these SFX-L PSUs will fit in the Lian li 011 mini ?

Will be fine mate, PSU length max your looking at 150mm or the length of the mobo tray which it site behind is 175mm .

 

[orbitalwalsh]

SX800-LTI is 130mm long while SFX is 100mm. Looking the pictures, I'd say there is enough room. Cable management might take hit but should be enough room for that too.

They are flat ribbon cables if they follow your other PSU products/cables ?
If I can squeeze the cables into rvz03 case then it should be a breeze in the D-Mini !

 

[orbitalwalsh]

@ThundyCat-Admin @ChugNorris

anyways to get @SilverStone Saku a Rep status on here ? ^^^^^^^

also finally noticed MSI - hope its not just a one show pony though

 

[orbitalwalsh]

It's SFX. There was hope of ATX, but only that. Lian Li stuck to the SFX size. Means that you can fit large CPU air coolers in but keeps the relatively narrow width.

Believe the width is just slightly slimmer then Standard Dynamic but still allowing 120mm exhaust / Custom AIB card with Waterblock

 

[orbitalwalsh]

3 more days

 

[orbitalwalsh]

https://preview.redd.it/d265w9ertk5...bp&s=bff025fa96956c2ff1f9253363d6a098e7db5a67

interesting . wanted to use 20.5mm thick XSPC up top with 15mm fans using ATX board.. seems it will work .

hunting that board. Gigabyte vision, the DIMM Latch has to be inline with the middle mobo mount hole

https://www.gigabyte.com/FileUpload/Global/WebPage/654/img/02.png
looking at gigabyte Gaming X of the same chipset , can see the latch is slightly higher so ram would class using 25mm fan and 27mm rad

https://static.gigabyte.com/StaticF...9748f103eec4efcfe0157/Product/25726/webp/1000

 

[orbitalwalsh]

I see there is a Snow Edition coming.. which should have been the white

seen here and on the expo

https://lian-li.com/2020-snowy-xmas/

1:20 in

19 mins in O11D EVO