Linksys Drivers

wannabedamned · 21 Nov 2007 at 18:57

I am looking for drivers for a Linksys wag354g router. I have searched high and low, checked all the usual places, Linksys website, Driverguide, etc. And cant find it.

Can anyone help?

swinnie · 21 Nov 2007 at 19:02

What version, 1 or 2?

me227 · 21 Nov 2007 at 19:03

Drivers for it? Do you mean firmware?

swinnie · 21 Nov 2007 at 19:04

I was just going to ask the same thing as have just thought of that.

Link here: http://www-uk.linksys.com/servlet/S...nksys/Common/VisitorWrapper&lid=1450758516L02

wannabedamned · 21 Nov 2007 at 19:11

It's definitely the drivers I'm looking for, and it's version one. Also I've already checked the linksys website and they only seem to have the firmware

swinnie · 21 Nov 2007 at 19:15

What do you need the Drivers for? (Purpose)

tolien · 21 Nov 2007 at 19:19

It doesn't have drivers. It connects using ethernet, and the only drivers you'll need are for your adapter (wireless or otherwise).

wannabedamned · 21 Nov 2007 at 19:19

swinnie said:
What do you need the Drivers for? (Purpose)

The guy that I'm getting them for says his routers stopped working and he needs to re-install them. He didn't ask for the drivers specifically but he says he lost the linksys CD that came with the router. He actually asked me for the setup files

swinnie · 21 Nov 2007 at 19:21

As Tolien said, it doesn't need drivers.

The only drivers needed are for Ethernet and/or Wireless adaptors on the computer(s)

Nymins · 21 Nov 2007 at 19:23

I use the exact same router and i use the "Firmware" from the Linksys website. No drivers are needed as mentioned above.

tolien · 21 Nov 2007 at 19:30

You don't need any setup files either - unless he's changed the router configuration, the default settings for his network card will connect fine.

wannabedamned · 21 Nov 2007 at 19:31

Right, I told him to just try powering down the router, and powering it back up again.

I also recommended attempting to connect to the modem using 192.168.0.1.

He lives in newcastle, so i cant help hands on.

I'm new to routers to be honest

I've just swapped from a usb modem to a Netgear router. Much nicer to not have to have the PC turned on all the time isnt it

tolien · 21 Nov 2007 at 19:34

The output from start, run, cmd, ipconfig /all for his network card would help too.

Nymins · 21 Nov 2007 at 19:51

wannabedamned said:
Right, I told him to just try powering down the router, and powering it back up again.

I also recommended attempting to connect to the modem using 192.168.0.1.

He lives in newcastle, so i cant help hands on.

I'm new to routers to be honest I've just swapped from a usb modem to a Netgear router. Much nicer to not have to have the PC turned on all the time isnt it

The Linksys router connects through 192.168.1.1, instead of the one you mentioned.

mrk · 21 Nov 2007 at 19:59

0.1 is for NETGEAR routers

wannabedamned · 21 Nov 2007 at 21:08

mrk said:
0.1 is for NETGEAR routers

BAH HUMBUG!

I just told him to try the other