• Notice regarding image hosts and attachments. See here.

Lost visuals

Associate
Joined
15 Sep 2011
Posts
26
Earlier this morning my pc was working fine. I have McAfee installed and I left it running its planned scan. I noticed the sceen saver running ok but when I came back later the screen was frozen and the image broken up. No black spaces but just like it had switched to a low resolution and could only pick up certain colours.

I switched the system off and rebooted. It came up with the normal user screen with perfect resolution but when I clicked on a user it loaded up the expected settings but with a screen I could barely read. I've swapped monitors but this made no difference. I've tried other users from the user screen with the same result.

I checked for loose connections into the monitor and pc, and also inside the box for the same plus I checked the video card and memory cards were seated properly. I aslo ran a system check before it booted up fully and this came back with no problems even though I could only just about make out what it said on screen.

I run VISTA Business on a Dell Vostro 420 which is about 4 years old now.

Like I say - it was working fine then just went weird!

Any help and advice would be much appreciated.
 
I've managed to find what I think is the adapter. Its ays NVIDIA GE Force 9800 CT. But there is no delete button just a disable button.

Is this the one I should go for?
 
ok, I'll clean out the fans. It's no use trying to do much else because the screen is becoming worse by the minute. Virtually unviewable now.
 
I've just felt the grphics card - the one with the fan built in - and it's very hot to the touch. Is this significant?
 
thanks for thtat beejjacobs!

I've swapped the monitor connectors and everything seems ok visually although it says its unsupported.

The NVIDIA seems like its had it. I took it out cleaned it but no change.

Next question is what should I replace it with?
 
When I booted the pc up after I had switched the connection from the NVidia card to the blue VGA connector, American Megatrends (Dell's people I suppose) flagged this up as an 'unsupported video configuration detected' plus 'an add-in graphic card is available' and gave instructions to switch to the graphics card.

I use this pc for e-mails, the web, photoshop, genealogy, report writing, and analysis using excel mainly now that I'm semi-retired.
 
I have tried another connection slot for the NVIDIA card but the effect is the same so it seems like its the card.

When I disconnected the cables from the NVIDIA card and booted it up there was a high pitched sound almost like a whistle and I connected the cable up again. So I'm not really sure how I can simply remove it.

Thanks for your help and advice. Much appreciated.
 
I've already removed the card from its housing and cleaned the fan out. That's not the problem. The problem is what do I do with the connector with the cables on? I'll try again tomorrow and see if I can get rid of the whistling sound. Maybe just removing the card (rather than disconnecting the cables) is the answer. The fan is making a noise now too! I'll see what tomorrow brings but thanks again.
 
Back
Top Bottom