max conroe voltages under phase

ArchAnGeL · 26 Jan 2007 at 18:20

what do you think is the max vcore for a 6400 under phase?

I can boot at 4 gig + 1.575v but fail superpi 1m but I am a bit nervous above this.

I don't think temps are a problem but speedfan isn't reading them correctly. It's showing 20 degrees but there's no way it's that hot looking at the evap head temp (-50). My last A64 would get just above zero with 1.75v through it and the evap head would read -42.

easyrider · 26 Jan 2007 at 18:23

1.8v?

1.575 is watercooling territory

Trusty · 26 Jan 2007 at 19:28

I would have said 1.7 - 1.8v aswell, but i dont think i would ever try it, too much of a wimp!

Just keep tracking your temp, if too high, set it back a notch!

ArchAnGeL · 26 Jan 2007 at 19:36

i'd not looked too much into it - 1.6 is the boards max!

fortunately that's got me to 4 gig so far (dual 32m superpi stable atm)

Massive Attack · 26 Jan 2007 at 20:03

ArchAnGeL said:
i'd not looked too much into it - 1.6 is the boards max!

fortunately that's got me to 4 gig so far (dual 32m superpi stable atm)

lol i can put 2.3v through mine :eek:

although ive not tried it and nor am i going to, whats the max recomened voltage on air cooling (ninja)

Rroff · 26 Jan 2007 at 20:43

I'm not that well versed in VID tables, etc. but according to the intel docs the conroe only goes upto 1.6volts and anything higher will result in it turning off.

w3bbo · 26 Jan 2007 at 23:21

I've had more than 1.6 through mine and it didn't turn off. :confused:

lavigne_22 · 27 Jan 2007 at 18:58

its ok at 1.7v i think........iv used for months seems fine....speedfan reports it at 1.66v

Massive Attack · 27 Jan 2007 at 19:05

lavigne_22 said:
its ok at 1.7v i think........iv used for months seems fine....speedfan reports it at 1.66v

speedfan reports what it wants to apparently my fans got round at 8000rpm, rated is 1800

lavigne_22 · 27 Jan 2007 at 19:06

yes i can see that but....u just take note of whats reading right