Melosie Project Pc desk

I don't know as this will be my first water cooled system. I know the procedure how to connect it but I dont know what to buy. It would be great guys if you can recommend something up to 350 pounds.
 
flame696 said:
good start with the build

Nothing wrong with his camera just needs to be a bit more steady and not to rush when taking photos
Click to expand...
Okay I will try to do so. I dont know why but my hands are going crazy when i take pictures. I get someone to do it for me so you guys can see better quality images. Sorry again for bad quality images.
 
I don't know as this will be my first water cooled system. I know the procedure how to connect it but I dont know what to buy. It would be great guys if you can recommend something up to 350 pounds. Also do sp120 peformance edition undervolt well?any issues?
 
SamyBoy13 said:
I don't know as this will be my first water cooled system. I know the procedure how to connect it but I dont know what to buy. It would be great guys if you can recommend something up to 350 pounds. Also do sp120 peformance edition undervolt well?any issues?
Click to expand...

is the budget for the full loop including waterblocks or just the pump and res?
and I've never had issues with mine
 
It's for CPU + GPU block res pump tubing rad fittings. Sorry but I forgot I got h100i so I can sell it and get more money for water so around 400-420 pounds
 
SamyBoy13 said:
I also found this fan controller Lamptron CW611 would it be also good for fans and pump?
Click to expand...
yes that would be absolutely fine
SamyBoy13 said:
Oh sh.. forgot to say CPU GPU:
CPU: I7 4770k
GPU: EVGA 780 SC ACX
Click to expand...

ok here is a rough estimate of what you could get:
-pump res: http://www.overclockers.co.uk/showproduct.php?prodid=WC-411-EK
-gpu block: http://www.overclockers.co.uk/showproduct.php?prodid=WC-494-EK
-cpu block: http://www.overclockers.co.uk/showproduct.php?prodid=WC-356-EK
-tubbing: http://www.overclockers.co.uk/showproduct.php?prodid=WC-356-EK
-fittings (I'm not sure how many you want/ need and you can substitute some of them for some angle fittings instead): http://www.overclockers.co.uk/showproduct.php?prodid=WC-449-EK
extra valve fitting for drain port: http://www.overclockers.co.uk/showproduct.php?prodid=WC-060-AQ
-coolant: http://www.overclockers.co.uk/showproduct.php?prodid=WC-096-MH
rads: http://www.overclockers.co.uk/showproduct.php?prodid=WC-025-BX

total including 10 fittings and two rads(as I said, you'll have to double check how many you want/ need): £400 ish. add £50 for the lamptron controller and you're good to go

what rad size are you looking for? I've put two thin 360mm in the price
 
I cannot put x2 360 rads. I can only put x2 240 rad or x1 360 thick rad that may have to be run in push pull. here i made fast model of where can everything go
fog5nc.jpg
 
Okay but would it make difference if run x2 240mm 40mm thick vs 360mm 65mm thick? Also how should I connect them what order (push/pull) it would be useful if someone can draw it on image above thanks.
 
SamyBoy13 said:
Okay but would it make difference if run x2 240mm 40mm thick vs 360mm 65mm thick? Also how should I connect them what order (push/pull) it would be useful if someone can draw it on image above thanks.
Click to expand...

realistically, the difference would only be a few degrees (if any) but nothing major. It'll manage to keep your system cool just fine.
regarding fan configuration, the performance would be the same no matter what but in pull, you wouldn't have to worry about dust as much. it would be easier to clean as well.
I'll have a look at writing the correct order later but as long as your reservoir is directly before your pump, you're good to go. the fluid will flow through the loop so fast that the component order shouldn't matter. just make sure you make the shortest runs as possible and don't cross tubing
 
Sorry for not updating the forum but I was busy recently. Here it's little update of what I ordered on Monday which just have arrived. I know I need to buy more but I don't know when I'm going to finish the project as not enough resources so be with me for some time
2v12f48.jpg
 
Hi there guys I need help as I dont know what push button to buy ? what is a diffrence between
Alternate Action button
Momentary Action button
as there are two types that are retail from overclockers.co.uk
 
Momentary Action button returns to it's original position once released, best for a PC on/off as you're not going to push it again to turn it off, as you'll select shutdown.
 
You must log in or register to reply here.
Back
Top Bottom