Mem Test Support

scotsdragon · 22 Jul 2015 at 11:19

ok guys i bought new cpu and ram from OC got it build it put in 4gb of ram i had.

When trying to install windows i got various bsod's tryed the usual change hdd and such i ran mem test and recieved one cpu error so i ran the cpu section on mem test and recieved the following.

https://www.youtube.com/watch?v=jiP-G9Ag24w

as you can see in the vid a lot of errors, im no expert in mem test so id like to know what they mean and if its the ram or cpu?

ED209 · 22 Jul 2015 at 11:24

you have some faulty ram.

remove a stick, run the test again until you find the faulty stick.

leave the faulty stick out and you should be good to go to install the OS, will mean you will need to RMA the ram and send it back

Brian18741 · 22 Jul 2015 at 12:52

You don't really need to decipher anything with memtest. If you get any errors, RMA your ram. Like Ed said, you can test each stick separately to see which (if not both) is causing the problem. Use the good stick and you'll be able to use your PC. However your going to have to send both sticks back to RMA,

kaku · 22 Jul 2015 at 13:14

It does look like faulty RAM, but what's up with the settings?

RAM at 192MHz @ 7-47-12-26 timings? Have you tried setting either XMP or default JEDEC setting in BIOS?