memory testing A64?
- Thread starter Cyber-Mav
- Start date
is there something fishy with test 8?
i can pass all other tests countless times but test number 8 is failing on me.
odd though since i managed to install windows on and even make numerous tests in super pi and got no errors.
thinking if there is something borked with the test or if there is something genuinely wrong with the hardware?
i can pass all other tests countless times but test number 8 is failing on me.
odd though since i managed to install windows on and even make numerous tests in super pi and got no errors.
thinking if there is something borked with the test or if there is something genuinely wrong with the hardware?
odd even underclocked at 182mhz and 3-3-3-10 timings i managed to install windows, run a few 3dmark 03 and 05 runs, run lots of super pi tests and got no problems, but memtest test 8 says i got errors. usually in windows i would have lots of crashes and in super pi a not exact in round error would occur or not convergent in sqr error on my nforce2 board when it used to fail the memory tests.
not sure what to do?
not sure what to do?
ram is crucial value stuff running at 182mhz which is below stock steeps at stock volts.
im going to try something in a few mins. i think memtest may have some compatability problem with this chipset or something.
odd how 3dm03 and 05 ran fine and super pi passed with no problems.
im going to try something in a few mins. i think memtest may have some compatability problem with this chipset or something.
odd how 3dm03 and 05 ran fine and super pi passed with no problems.
ok interesting, i set the ma timing to 2t, im sure this is the command rate, and so far there are no errors in memtest test 8. im gonna let it carry on testing.
looks like the memtest benchmark shows almost a 400mb/s drop in speed going to 2t.
is this because of the board or is it because the memory i have is crappy? although its doing 228mhz which i thought is not too shabby for value ram.
if im limited to 2t would i suffer any more by adding another 2 gig to the system to get 4 gig in total? hoping that the new 2 sticks can handle 228mhz speed.
would i have to get more crucial value ram or can it be any other brand dual channel kit?
looks like the memtest benchmark shows almost a 400mb/s drop in speed going to 2t.
is this because of the board or is it because the memory i have is crappy? although its doing 228mhz which i thought is not too shabby for value ram.
if im limited to 2t would i suffer any more by adding another 2 gig to the system to get 4 gig in total? hoping that the new 2 sticks can handle 228mhz speed.
would i have to get more crucial value ram or can it be any other brand dual channel kit?
yep i have bios version 1.60.
been reading in the asrock thread in the mobo section about a 1t problem, it may not be ram related and may be board related.
either way i hear that if i use 4 sticks of ram i have to run 2t regardless of what sort of ram it is.
guess i may just get another 2 gigs since it only costs 50 quid a stick these days for crucial value ram.
been reading in the asrock thread in the mobo section about a 1t problem, it may not be ram related and may be board related.
either way i hear that if i use 4 sticks of ram i have to run 2t regardless of what sort of ram it is.
guess i may just get another 2 gigs since it only costs 50 quid a stick these days for crucial value ram.
right im using xp64 currently.
been reading around and it seems to be a bug with the board where only certain sticks will run in a 1T configuration.
ok any one know of any 2gig kit thats good for 280mhz at voltage below 2.7v?
been reading around and it seems to be a bug with the board where only certain sticks will run in a 1T configuration.
ok any one know of any 2gig kit thats good for 280mhz at voltage below 2.7v?
xiphrex your right thats the same stuff i have been reading on lots of other forums, my ram is not the problem it is the board. apparently certain sticks work fine in 1t mode, BH5 seem to be fine according to various sources.
i was getting scared since memtest showed my bandwidth to drop by 400mb/s when going into 2t from 1t. i assumed that would be a big dip in speed but people saying that its not gonna effect me much.
also i got 2x512mb sticks lying around. is it possible for me to put thse 2 sticks in the other available black ram slots and run 3gig of ram? or do all 4 sticks have to be of equal capacity?
i was getting scared since memtest showed my bandwidth to drop by 400mb/s when going into 2t from 1t. i assumed that would be a big dip in speed but people saying that its not gonna effect me much.
also i got 2x512mb sticks lying around. is it possible for me to put thse 2 sticks in the other available black ram slots and run 3gig of ram? or do all 4 sticks have to be of equal capacity?
right, currently on pass 7 of 3gig ram and no errors so far running memtest test 5.
will let it run about 10 passes then i will switch the test over to test 8 and let it go for another 10 passes.
bad thing is the memtesting is taking longer now. probably because there is more ram to test
will let it run about 10 passes then i will switch the test over to test 8 and let it go for another 10 passes.
bad thing is the memtesting is taking longer now. probably because there is more ram to test