Soldato
My memory is currently running at 212MHZ 2.5-3-3-8 what should i change to see if it will go any further?
see pic below
see pic below
Memory Timings question??
- Thread starter StevenG
- Start date
Soldato
try 2-3-3-8
Or 2-3-3-5
What ram is it? Thats about the only way to determine how they're likely to do
Or 2-3-3-5
What ram is it? Thats about the only way to determine how they're likely to do
Soldato
cas latency to 2 then if at all possible get 2, 2, 5 (the next 3)
Soldato
- Joined
- 18 Oct 2002
- Posts
- 6,669
Try to follow the following:
tRAS = tRCD + tCL + 2
e.g.
CAS = 2
tRCD = 2
=> tRAS = 6
or
CAS = 2.5
tRCD = 3
=> tRAS = 8
I'd give the RAM 2.8v and try 2-2-2-6 timings starting @ 200 Mhz and go from there, increasing the clock speed until they crap out.
tRAS = tRCD + tCL + 2
e.g.
CAS = 2
tRCD = 2
=> tRAS = 6
or
CAS = 2.5
tRCD = 3
=> tRAS = 8
I'd give the RAM 2.8v and try 2-2-2-6 timings starting @ 200 Mhz and go from there, increasing the clock speed until they crap out.
its twinmos ram but i dont know any more than that. i'll try the suggested tomorrow thanks for replies