Hi,
This might be a fairly simple and obvious question for people who know (which unfortunately isn't me), But could someone please advise if it is possible to upgrade the memory on my pc from its current 2gb of memory to 4gb?
Below is some information that might help you to detect whether an upgrade is possible for my pc:
Processor: Intel Core 2 Duo CPU E4500 @ 2.20GHz
Motherboard: Foxconn 45GM/45CM
Bios: Phoenix Technologies V 6.00
Chipset: Intel i945G/GZ
General Memory Information :
A0 (RAS 0, RAS 1) : 1024 (Double Bank)
A1 (RAS 2, RAS 3) : 1024 (Double Bank)
Information SPD EEPROM (A0) :
Manufacturer : Unspecified
Part Number : Unspecified
Serial Number : Unspecified
Type : DDR2-SDRAM PC2-5300 (333 MHz)
Format : Regular UDIMM (133.35 x 3)
Size : 1024 MB (2 ranks, 4 banks)
Module Buffered : No
Module Registered : No
Module EPP : No
Width : 64-bit
Error Correction Capability : No
Max. Burst Length : 0
Refresh : Reduced (.5x)7.8 µs, Self Refresh
Voltage : SSTL 1.8v
Prefetch Buffer : 4-bit
Manufacture : Week 0 of 2000
Supported Frequencies : 200 MHz, 266 MHz, 333 MHz
CAS Latency (tCL) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
RAS to CAS (tRCD) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
RAS Precharge (tRP) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
Cycle Time (tRAS) : 9 clocks @200 MHz, 12 clocks @266 MHz, 15 clocks @333 MHz
Min TRC : 12 clocks @200 MHz, 16 clocks @266 MHz, 20 clocks @333 MHz
Information SPD EEPROM () :
Manufacturer : Unspecified
Part Number : Unspecified
Serial Number : Unspecified
Type : DDR2-SDRAM PC2-5300 (333 MHz)
Format : Regular UDIMM (133.35 x 3)
Size : 1024 MB (2 ranks, 4 banks)
Module Buffered : No
Module Registered : No
Module EPP : No
Width : 64-bit
Error Correction Capability : No
Max. Burst Length : 0
Refresh : Reduced (.5x)7.8 µs, Self Refresh
Voltage : SSTL 1.8v
Prefetch Buffer : 4-bit
Manufacture : Week 0 of 2000
Supported Frequencies : 200 MHz, 266 MHz, 333 MHz
CAS Latency (tCL) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
RAS to CAS (tRCD) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
RAS Precharge (tRP) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
Cycle Time (tRAS) : 9 clocks @200 MHz, 12 clocks @266 MHz, 15 clocks @333 MHz
Min TRC : 12 clocks @200 MHz, 16 clocks @266 MHz, 20 clocks @333 MHz
Memory Controller Information :
Memory Controller : System Memory
Location : Mainboard
Error Correction Capability : No
Number of connectors : 2
Max. Module Size : 2048 KB
Hope this helps, any advice would be very helpful.
Thanks,
Alan
This might be a fairly simple and obvious question for people who know (which unfortunately isn't me), But could someone please advise if it is possible to upgrade the memory on my pc from its current 2gb of memory to 4gb?
Below is some information that might help you to detect whether an upgrade is possible for my pc:
Processor: Intel Core 2 Duo CPU E4500 @ 2.20GHz
Motherboard: Foxconn 45GM/45CM
Bios: Phoenix Technologies V 6.00
Chipset: Intel i945G/GZ
General Memory Information :
A0 (RAS 0, RAS 1) : 1024 (Double Bank)
A1 (RAS 2, RAS 3) : 1024 (Double Bank)
Information SPD EEPROM (A0) :
Manufacturer : Unspecified
Part Number : Unspecified
Serial Number : Unspecified
Type : DDR2-SDRAM PC2-5300 (333 MHz)
Format : Regular UDIMM (133.35 x 3)
Size : 1024 MB (2 ranks, 4 banks)
Module Buffered : No
Module Registered : No
Module EPP : No
Width : 64-bit
Error Correction Capability : No
Max. Burst Length : 0
Refresh : Reduced (.5x)7.8 µs, Self Refresh
Voltage : SSTL 1.8v
Prefetch Buffer : 4-bit
Manufacture : Week 0 of 2000
Supported Frequencies : 200 MHz, 266 MHz, 333 MHz
CAS Latency (tCL) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
RAS to CAS (tRCD) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
RAS Precharge (tRP) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
Cycle Time (tRAS) : 9 clocks @200 MHz, 12 clocks @266 MHz, 15 clocks @333 MHz
Min TRC : 12 clocks @200 MHz, 16 clocks @266 MHz, 20 clocks @333 MHz
Information SPD EEPROM () :
Manufacturer : Unspecified
Part Number : Unspecified
Serial Number : Unspecified
Type : DDR2-SDRAM PC2-5300 (333 MHz)
Format : Regular UDIMM (133.35 x 3)
Size : 1024 MB (2 ranks, 4 banks)
Module Buffered : No
Module Registered : No
Module EPP : No
Width : 64-bit
Error Correction Capability : No
Max. Burst Length : 0
Refresh : Reduced (.5x)7.8 µs, Self Refresh
Voltage : SSTL 1.8v
Prefetch Buffer : 4-bit
Manufacture : Week 0 of 2000
Supported Frequencies : 200 MHz, 266 MHz, 333 MHz
CAS Latency (tCL) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
RAS to CAS (tRCD) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
RAS Precharge (tRP) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
Cycle Time (tRAS) : 9 clocks @200 MHz, 12 clocks @266 MHz, 15 clocks @333 MHz
Min TRC : 12 clocks @200 MHz, 16 clocks @266 MHz, 20 clocks @333 MHz
Memory Controller Information :
Memory Controller : System Memory
Location : Mainboard
Error Correction Capability : No
Number of connectors : 2
Max. Module Size : 2048 KB
Hope this helps, any advice would be very helpful.
Thanks,
Alan
