Associate
- Joined
- 15 Jan 2013
- Posts
- 4
Hello all,
I've got a few questions about a VMware ESX host that I'm putting together for a home lab.
I recently bought a HP ML110 G7 with the G840 CPU and have upgraded the CPU and RAM to an E3-1240 with 32 GB using Kingston KTH-PL313E/8G memory.
I've also put a HP P410 SAS RAID controller with 256 BBWC (HP part 462862-B21) into it with the intention of doing a RAID 5 setup on three Seagate Constellation *CS* 2TB drives.
Unfortunately my knowledge of newer cabling technologies is fairly lacking, hence I'm here asking for advice.
I've did a bit of research and it seems that I'll need to buy a Mini SAS to 4x SATA *forward* breakout cable (I'd never heard of these cables before yesterday).
My questions are:
1. Am I correct in thinking that I'll need a Mini SAS to 4x SATA *forward* breakout cable - if so, are there any recommendations?
2. There is already a cable connected to the onboard Mini SAS port on the ML110 - could I just disconnect this cable and plug it into the P410?
3. If I *can* disconnect and reuse the cable that came with the ML110, can it easily be disconnected from the onboard port? (I've read some horror stories about damaged cables/ports when Mini SAS cables are unplugged).
4. And finally, has anyone used the Seagate Constellation CS 2TB drives with the ML110?
Apologies, if the questions seem a bit daft but my knowledge of SAS cabling is non existent and I don't want to buy kit that I can't use.
Thanks in advance for any help that you can provide.
Paul
I've got a few questions about a VMware ESX host that I'm putting together for a home lab.
I recently bought a HP ML110 G7 with the G840 CPU and have upgraded the CPU and RAM to an E3-1240 with 32 GB using Kingston KTH-PL313E/8G memory.
I've also put a HP P410 SAS RAID controller with 256 BBWC (HP part 462862-B21) into it with the intention of doing a RAID 5 setup on three Seagate Constellation *CS* 2TB drives.
Unfortunately my knowledge of newer cabling technologies is fairly lacking, hence I'm here asking for advice.
I've did a bit of research and it seems that I'll need to buy a Mini SAS to 4x SATA *forward* breakout cable (I'd never heard of these cables before yesterday).
My questions are:
1. Am I correct in thinking that I'll need a Mini SAS to 4x SATA *forward* breakout cable - if so, are there any recommendations?
2. There is already a cable connected to the onboard Mini SAS port on the ML110 - could I just disconnect this cable and plug it into the P410?
3. If I *can* disconnect and reuse the cable that came with the ML110, can it easily be disconnected from the onboard port? (I've read some horror stories about damaged cables/ports when Mini SAS cables are unplugged).
4. And finally, has anyone used the Seagate Constellation CS 2TB drives with the ML110?
Apologies, if the questions seem a bit daft but my knowledge of SAS cabling is non existent and I don't want to buy kit that I can't use.
Thanks in advance for any help that you can provide.
Paul