mobo connections

davie77 · 6 Jan 2011 at 20:17

do all these connections look ok there seems to be empty pin conection and not sure if aye should be attaching the digi audio somwere as hdaudio is already attached

[/URL] Uploaded with ImageShack.us[/IMG]

thecomputerguy · 6 Jan 2011 at 20:19

hard to see from that pic m8

davie77 · 6 Jan 2011 at 20:24

thecomputerguy said:
hard to see from that pic m8

ill try get a better one

Hagar · 6 Jan 2011 at 20:24

You have one empty USB which could supply another two ports with a suitable bracket. I cannot see what the other ones are, not all motherboards or cases have all the connections. You need a power switch connected, all others are optional, HDD led, power led, reset switch, speaker etc.

Digi audio, is that from the optical drive? usually the sata or IDE cable deals with digital audio, analog audio from a DVD drive used to require a seperate lead.

andy

davie77 · 6 Jan 2011 at 20:44

nkata said:
You have one empty USB which could supply another two ports with a suitable bracket. I cannot see what the other ones are, not all motherboards or cases have all the connections. You need a power switch connected, all others are optional, HDD led, power led, reset switch, speaker etc.

Digi audio, is that from the optical drive? usually the sata or IDE cable deals with digital audio, analog audio from a DVD drive used to require a seperate lead.

andy

theres 4 usb on front of case and 4 on back only had 2 conecters tht said usb there wasnt another one , put up some clearer pics aint sure were that didi audio is going the manual recomended a use the hd audio so a put that in the digi one is attatched to same cable