MoNsTa

Got me a new Lamptron FC3 Fan Controller

Picture001-13.jpg


Dont worry its being painted white .
Primer for now
Picture003-9.jpg


Heatkiller waterblock brackets now white.

Picture004-6.jpg


And the DDC Pump bracket.
Picture005-5.jpg


And whats this?
Picture006-3.jpg


Painted some silver AC Ryan small holed mesh white for the bottom rad cuts,i think they will look better,mesh on the window will be replaced with plexi of some sort.
Now lets move on to the monsta,black heck no going white,the rad panels where riveted on so i had to drill them out and i found out the holes where tapped to take M4 screws,so i got some countersunk black ones and redrilled the panels to take them,no piccys of me doing this though.

Rad sanded down with wet & dry.
Picture007-3.jpg


All masked up and even recycled a spam letter that the posty had delivered 10 mins ago.
Picture008-8.jpg


A few coats of grey primer this i will leave to dry over night and then start to paint white.
Picture010-6.jpg


Hope you enjoy :)
 
Piccys of the rad painted white .

Picture001-15.jpg


Picture002-11.jpg


Picture003-10.jpg


Picture004-12.jpg


Picture005-11.jpg


Picture006-4.jpg


Picture007-5.jpg


Had to take the paint off the heatkiller block brackets as they would`nt fit back in .
 
Thanks really is very easy to d tbh :)

Here is a quick piccy of how the rad mesh looks now was takin on my bed the quilt makes it look a bit weird but its ok :)
Picture.jpg
 
A few piccys of the rad with the masking tape off.

Picture008-10.jpg


Picture009-7.jpg


Picture010-8.jpg



This a 22" iiyama tft in the background to show you the size of this beast.

Picture011-6.jpg
 
Thanks :) white seems to be the new black as everybody whent mad a while back buying black case`s.
 
Sidepanel on the case with new rad mesh.
Think i may have to get a red plexi window now to match my new board. :)

1.jpg


evga1.jpg


evga2.jpg
 
4 way Crossfire. :)



Don't think I need to comment on how good its looking mate, keep it up.

Thanks Azza its good to see you again mate :)

22/05/09
Wee update a set of bitspower waterblocks have been ordered for the EVGA X58 Classified from Holland today so piccys when they arrive :)
 
Nah mate just sold my hard drive to some bloke :D
My cpu has been sold also and my ram is on the mm as i fancy some Corsair gt stuff to match my board.
 
Bitspower blocks have arrived from Highflow in Holland,it only took 2 days to get here ,got a freebee Kitkat had to fight the wife and kids to keep this.

Picture001-22.jpg


Mosfet block.
Picture002-17.jpg

Picture003-19.jpg


Northbridge/southbridge.
Picture004-15.jpg


And another little change,Ocz Vertex 60gb ssd.
Picture005-13.jpg


Just need to sort out a new pump and cpu waterblock and i can get on with the build and finish it :)
 
Them blocks look sweeet. Looking very good mate. You may aswell get the 975 chip now :)

I will never get the 975 cpu for the main reason being the 920 can do over 4ghz with no problem,i have changed my C0 to D0 for better clocking on lower volts.
 
The 2 top 140mms work well blowing air in as it helps cool the videocard and motherboard,what i will do is try and fit a dust filter,there is a 120mm fan blowing the air out and i can put up with the dust.
 
Back
Top Bottom