Moving to Be* LLU

Valo

Valo

Valo

Soldato
Joined
18 Oct 2002
Posts
3,817
Location
Livingston
My exchange is shortly going to be enabled for Be and I'm curious to find out what sort of speed I could expect?

I'm currently with freedom2surf on there ADSL Max service.

Here are my line stats:

ADSL Link Downstream Upstream
Connection Speed 6656 kbps 448 kbps
Line Attenuation 32 db 9 db
Noise Margin 6 db 24 db
 
i am not too far from my exchange and i get about 20mb/s it all depends on the distance from the exchange. if you are close expect 20+ if you are further then anything over 15 i guess
 
Im 2km from exchange and on Nildram I could expect 6meg I think 'Be' customer services said I could expect 11meg?
 
your stats is nearly same as mine

i got activated with BE on 2nd Jan

Uptime: 0 days, 6:51:20
Modulation: G.992.5 Annex A
Bandwidth (Up/Down) [kbps/kbps]: 1,330 / 15,465
Data Transferred (Sent/Received) [MB/MB]: 11.18 / 103.64
Output Power (Up/Down) [dBm]: 12.0 / 17.0
Line Attenuation (Up/Down) [dB]: 15.0 / 32.5
SN Margin (Up/Down) [dB]: 6.5 / 4.0

so you should get between 14mb to 16mb :)
 
How far from the exchange are you wesley?

This site here says I'm 1.33 as the crow flys!!

Be interested in knowing as I may go to 'Be' as my exchange went live last month! :D

Cheers
 
tweakinfreak said:
How far from the exchange are you wesley?

This site here says I'm 1.33 as the crow flys!!

Be interested in knowing as I may go to 'Be' as my exchange went live last month! :D

Cheers
Click to expand...

Straight line distance can be deceiving, it's best to post your attenuation; it's a better indication.
 
i'm 1.6KM away from my local exchange, (straight line) but the actual length of phone line is just over 1.9KM. i know a mate who is 2KM away from his local exchange but his actual length of phone line is over 4KM
 
I see, is there any way of finding out actual line length?

Or can I only know that once I have 'Be' or ADSL installed?
 
Ah I see, took Linksys router out to do some cabling the other week, I'll pop it back in this week and post info ;)

Thanks mate
 
tweakinfreak said:
Ah I see, took Linksys router out to do some cabling the other week, I'll pop it back in this week and post info ;)

Thanks mate
Click to expand...


The DMT tool works with the Linksys WAG54GS just for your info.
 
What do my stats tell you guys?

Uptime: 2 days, 16:37:33
Modulation: G.992.1 Annex A
Bandwidth (Up/Down) [kbps/kbps]: 448 / 4,640
Data Transferred (Sent/Received) [MB/MB]: 76.79 / 534.88
Output Power (Up/Down) [dBm]: 11.5 / 18.5
Line Attenuation (Up/Down) [dB]: 31.5 / 51.0
SN Margin (Up/Down) [dB]: 22.0 / 9.5
Vendor ID (Local/Remote): TMMB / 
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 54,900 / 0
FEC Errors (Up/Down): 2 / 0
CRC Errors (Up/Down): 160 / 83,641
HEC Errors (Up/Down): 78 / 62,752
 
you got line attenuation of 51 and sync'd at 4.6mb. i doubt you'll get better speed with ADSL2+, maybe 1meg increase but you should be able to get full 1.3mb upload speed if u move to BE
 
You must log in or register to reply here.
Back
Top Bottom