MSI K8N Neo2 Platinum

quadboi · 24 Apr 2006 at 21:35

Any good? I have an asrock 939 dual, is it better than that, I know its agp, I have a agp card, is it a better overclocker than what I have now
?

Your thoughts...

Also what is the BEST AGP socket 939 Overclocking board... :confused:

Mr Paul · 24 Apr 2006 at 22:09

It is the best 939 AGP clocking board!

quadboi · 24 Apr 2006 at 22:17

I had a look in a thread, and everyone was having great problems with it... not getting past 235 htt...Thanks draxx,

satpal.johal

Topitoff · 25 Apr 2006 at 00:44

Both mine do 300+; although I run them at 285 atm.

quadboi · 25 Apr 2006 at 07:27

Oh so, why were so many people having problems, what voltage is the max you can go too

Mr Paul · 25 Apr 2006 at 11:44

I'm at 280HTT and I have been doing some tests and its 10 hour prime stable at 315Mhz HTT, the problem I have is that my BH-6 needs voltage that I just can't provide as board only goes to 2.9v and my booster will not fit due to my XP-90C. Hence it will only do 200Mhz ish

james.miller · 25 Apr 2006 at 11:48

mine did >300fsb. tbh though, i didnt need it. I dont have ram that'll do >250mhz, and my cpu has an 11x multiplier (god bless the opty 148) so even with a board limited to 272fsb (my jetway pci-e board that i replaced the neo2 with) , im still sitting happily *just* under 3ghz.

spb251272 · 25 Apr 2006 at 15:59

I'm running at 255x10 with my x2 3800, and have been 24/7 since September. TBH I haven't tried getting higher with a 9x mult, as I'm pretty happy with current performance. It's a good solid board in my opinion - I've had zero problems so far

melchy · 25 Apr 2006 at 16:04

The Epox NForce 3 boards are pretty good as well if you can find them anywhere.