MSI R9 290X Lightning no output to monitor

[lusty91a]

Intel 5960X
G.SKILL Ripjaws 4 Series 32GB
ASUS RAMPAGE V EXTREME X99
Win 10 64 BIT
No output from the monitor,have tested a Nvida 660ti this works fine no issues so the slot on the Mobo is working. OverClockers have tested card they are unable to find issue.Removed drivers and reinstalled still no output from card to screen. Help please

 

[Monkeh]

What PSU are you using and have you tested it? A 290x needs more power than a 660ti just FYI.

 

[Sasahara]

I take it you have the card back.

When you put the card in the PCI-X slot make sure it's fully in, some new cards may require a good firm push to make full contact.

Have tried different power connectors on the card, it is possible for a PSU to work, but not on all lines?

What connection are you using to the monitor?

Update bios if all else fails.

 

[lusty91a]

I take it you have the card back.

When you put the card in the PCI-X slot make sure it's fully in, some new cards may require a good firm push to make full contact.

Have tried different power connectors on the card, it is possible for a PSU to work, but not on all lines?

What connection are you using to the monitor?

Update bios if all else fails.

I have updated to the latest bios,PSU is a Corsair RM1000 also tried separate power rails.I have used HDMI/DVI to HDMI /DVI connections still the same no output to the monitor.Card has been back to Overclockers several times they say they cant fined an issue with the card(which I am very suspicious about) .The card is a replacement card from MSI as my last one did have a fault and OVerclockers sent it back to MSI. Should I wipe my PC and do a fresh install ?

 

[Monkeh]

I would be trying another PSU at this point before wiping anything.