My latest watercooled build log.... :)

Associate
Joined
1 Jan 2012
Posts
1,787
Location
Scottish Borders - UK
A7177F24-570B-4685-A683-4DBD2089A383-36064-00000BB98B525066.jpg


I like getting deliveries!!

Let the fun commence this evening.
 
Associate
Joined
1 Jan 2012
Posts
1,787
Location
Scottish Borders - UK
1st job - cut out the fan mesh. Not the neatest, but what can't be seen doesn't bother me!!

Ignore the drive bay mangled metal. This is a temp measure so I could fit the rad as the Dremel was way too noisey late at night!!

FAB022C0-FF0C-4049-805F-8371723383C1-38338-00000C51F83691C4.jpg




0A608C44-7684-4D7D-B882-10642AC090EC-38338-00000C51FE29BAB3.jpg




Good news! 60mm push/pull fits in the roof!!

C163C8C8-BD3A-45B5-A684-89B80196DAD4-38338-00000C52057EBF7E.jpg


B1260762-0DDF-47EE-BC56-5AC6CAB33002-38338-00000C520ED37532.jpg


4DFC0DDC-C595-4933-95F0-11E97B12844C-38338-00000C521EC541B1.jpg


DCD6422C-B0B6-4375-B926-ED4CF18FCFF4-39114-00000C984CAA5861.jpg
 
Last edited:
Associate
Joined
1 Jan 2012
Posts
1,787
Location
Scottish Borders - UK
Excuse the poor pics - poor lighting and a camera phone!!

Still waiting to see what the red is like in the day time as I may need to add more dye.

Also I thought I might as well slap the 120 on the rear as it isn't too bad back there. Need to get a decent fan for it now though!
 
Associate
Joined
1 Jan 2012
Posts
1,787
Location
Scottish Borders - UK
I'm toying with the idea of ordering some red braided cables for the PSU.... Mmmmm.

It would have been a lot neater without the rear 120 - but seeing as I had it and it's not hanging off a mile, I thought I might as well use it.
 
Associate
Joined
7 Jul 2009
Posts
84
Location
Norwich
if you're using a corsair psu (like i see in the background of that photo) then i recommend taking a look at the corsair pre sleeved cables if they offer what you're after. They are verry vibrant, the connections are decent quality, easy to install, not too stiff and are suited for the psu (no need to extend the stock cables). This also means you wont see black standard cables coming from the bottom of the psu, then coloured cables coming through the cable management holes, if that makes sense.
pgreenwo's thread is an example of what the red ones look like: http://forums.overclockers.co.uk/showthread.php?t=18415428&page=5
 
Last edited:
Associate
Joined
1 Jan 2012
Posts
1,787
Location
Scottish Borders - UK
Top Bottom