Associate
- Joined
- 26 Nov 2018
- Posts
- 6
A couple fo weeks ago while rendering a video 100c on my cpu caught my eye, I knew that it was time to do something about it and after a nice research on google I decided to try them all. Undervolting, fan profile and replacing thermal paste, but I still wasn't happy with the results. Then I heard about this magical compound that would drop 10c even on a cleaned system! So, I was like, let's go for it! Today I got my tube and was really happy about it and after applying kapton tape and the lm the temps were even worse than before
I knew something wasn't right therfore opened notebook again and while I was changing the tip 3 tear sized drops landed in my opened notebook, FUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU, one splashed in the gpu, another one in the battery bay another one on the heatsink. Ok, I can fix this, tried to suck the lm back in the tube but popped the plunger out and more lm spilled all over the place
So I unscrewed the tip and slowly pushed the punlger back in the barrel then put the tip back on and sucked in more lm and did this for 30 mins. Surprisingly I didn't loose any lm, anyway after applying more the second time temps were better but not what I expected. Too be sure I didn't put too much I opened it up again one last time and it was all fine.
RESULTS HERE:
The laptop is an msi gt70 barebone from medion.
-0.090v repasted with prolimatech pk-2 twice and fan set to 100% when gpu/cpu hits 80c Also, there is 1c difference when the gpu is not overclocked.
Thermal Grizzly Conductonaut with cpu undervolt and fan set to 100% when gpu/cpu hits 80c
I think that my results aren't that great because the heatsink is not making properly contact with the die.
Well, thanks for reading I hope you had fun and if you have any suggestions let me know!
![confused.gif](https://www.techpowerup.com/forums/styles/tpu/smilies/confused.gif)
![laugh.gif](https://www.techpowerup.com/forums/styles/tpu/smilies/laugh.gif)
RESULTS HERE:
The laptop is an msi gt70 barebone from medion.
![bgdsYXj.png bgdsYXj.png](https://forums.overclockers.co.uk/data/attachments/325/325112-da3d891323a610e5dfccfe0f9149dec2.jpg)
-0.090v repasted with prolimatech pk-2 twice and fan set to 100% when gpu/cpu hits 80c Also, there is 1c difference when the gpu is not overclocked.
![AmuECHS.png AmuECHS.png](https://forums.overclockers.co.uk/data/attachments/325/325113-62dc5e5f88b50af6e7c493881ef51348.jpg)
Thermal Grizzly Conductonaut with cpu undervolt and fan set to 100% when gpu/cpu hits 80c
I think that my results aren't that great because the heatsink is not making properly contact with the die.
![qQceBSz.jpg qQceBSz.jpg](https://forums.overclockers.co.uk/data/attachments/325/325114-c3f127826ec225a82ff0545ec872b807.jpg)
![KWSPPX3.jpg KWSPPX3.jpg](https://forums.overclockers.co.uk/data/attachments/325/325115-bebe4023b85bc54e3eff5f9ae6fda870.jpg)
Well, thanks for reading I hope you had fun and if you have any suggestions let me know!