• Notice regarding image hosts and attachments. See here.

My new build.

now with better cable management, black leads from psu to mobo, and the sata cables covered with black insulating tape :)
2a0dijq.jpg
 
Hi,

I have the same case and think its great, I am also looking into water cooling and want a good 280mm rad to come out but haven't found on yet.

SDC10610.jpg
 
Hi,

I have the same case and think its great, I am also looking into water cooling and want a good 280mm rad to come out but haven't found on yet.

What are your temps mate?

46° ish idle, hits about 60° on full load.

What programme are you using to stress the cpu? I run Intel Burn test and mine goes to 80c during 75 runs :confused:. Im using the same cooler just different fans. Find it hard to believe you are at 60c full load :p.

My idle temps:
2d6msgk.jpg


Load temps with just 5 runs of IBT:
2wntq8h.jpg
 
Last edited:
What are your temps mate?



What programme are you using to stress the cpu? I run Intel Burn test and mine goes to 80c during 75 runs :confused:. Im using the same cooler just different fans. Find it hard to believe you are at 60c full load :p.

My temps are around 43ish for idle and 75 for load using prime small fft. 60 does seem very good!
 
Well that's certainly what it reads at, it hits 58-65° on each core. I've used coretemp and realtemp, they both show identical results.
 
I dont mean what programme you use to monitor the temps mate. I was refering to the programme you use to stress test the cpu.

For example:
Prime 95
Intel Burn Test
Linx
 
Oh right, I used prime.

I understand IBT can get the temps quite a bit hotter, but I see no point in running that test as my processor will never get that hot doing the things I use it for anyway :P
 
Back
Top Bottom