My New Coolermaster HAF 932 Setup

Hayleywow

Hayleywow

Hayleywow

Associate
Joined
4 Aug 2009
Posts
168
Location
Bournemouth, UK
Hi Guys

Well my Coolermaster HAF 932 case came yesterday, So I transfered my system over to it, I much prefer this case to the Antec 902 (much better airflow & fans are silent)

Anyway I have tried my first attempt at cable management - Let me know what you think.

Another reason for getting this case, is that i'm going to attempt watercooling soon, and this case has plently of roooooooooom.

So here's the pictures, let me know what you think, and where I can improve

15quv42.jpg


smyfbm.jpg


Thanks

Hayley
 
Last edited:
I think your processor heatsink/fan should be oriented 90 degrees different from what it is so it's blowing straight out the exhaust.. that right?
 
Xappy said:
I think your processor heatsink/fan should be oriented 90 degrees different from what it is so it's blowing straight out the exhaust.. that right?
Click to expand...
Correct, if you leave it like that the heat from the graphics card will rise up to your cpu cooler causing higher temperatures .
 
Make sure all the fans are blowing towards the back when you change the direction of the heat sink, other wise good job and excellent cable management for a first timer.
 
One question does it matter that the cables behind the mobo tray are abit untidy?????????? will it effect anything????

About to rotate the CPU 90 degrees now
 
Hopefully when I come to watercooling I will spray the inside of the case black as well, didn't have time today.

Another couple of pictures to show I have turned the CPU cooler round, also install a blue light, will get a red one sometime, or might change the front fan to blue at some point.

Cables aren't to back behind mobo tray all cable tide, but could be neater, but as you can't see them, no biggie i think.

Here's the pic's

j08d21.jpg


2akmssw.jpg
 
Thats good for the cable management, better than mine

105.jpg


102.jpg


Im getting a new gtx285 gpu and essence stx souncard on monday, so will attempt to give it another shot.

Why have you got your PSU upside down..?
 
Bugger yeah I just noticed that too LOL, another thing I need to change.

Is it me or are the USB's on the front of the case upside down, All my USB pen drives go in upside down.

I like the monitor Niceeeeee
 
glad u got sorted its a nice case,cable managerment is good,pitty you psu cables wont go through bottom hole and out of the side hole next to the 12 pin power connection,i bet you could get an extension cable,regards watercooling its got plenty of room in there,mount you res on the harddrive unit like mine if you go with that res i have.im selling my haf932 case now pitty you could have got mine well done tho
 
im after a lain li modded case i need a few more quid to make up enough hopefully.

your temps for your card seem ok,mine on idle is 38c max load is 68c but thats watercooled you be happier when you go down that route.

whats your temps under load have you used linx to see if all is stable ect
 
I have run Prime95 Torture test for about an hour and got these temps

2ui8wvd.jpg


No BSOD, no restarting - nothing pretty stable, I don't know if Prime95 is the best benchmarking software to you, but it was the one Ocuk recommended when I specced my system.
 
You must log in or register to reply here.
Back
Top Bottom