my new setup with a tunig tower

[scubes]

hello ive got a coolermaster stacker nvidia edition and want to no if this cooler will fit along with my xfx 780i mobo.

heres the cooler
http://www.overclockers.co.uk/showproduct.php?prodid=HS-001-SB&groupid=701&catid=57&subcat=
heres my mobo
http://www.overclockers.co.uk/showproduct.php?prodid=MB-001-XF&groupid=701&catid=5&subcat=1057

heres my case

http://www.overclockers.co.uk/showproduct.php?prodid=CA-141-CM&groupid=701&catid=7&subcat=29

cheers for reading this.... UPDATED!!!!!!

 

[ash_scotland88]

you links are going straight to the OCuk home page.

 

[scubes]

sorry mate

ive no idea why that is happing tbh i cut and pasted it for the page the cooler was on.

 

[David91]

what do you mean "along with your xfx 780i mobo?"

if you mean will the cooler fit on the 780i then most probably, as long as that fan isn't ridiculously tall (over 5cm tall), but if the cooler wont fit vertically try spinning it to horizontal. the cooler supports your motherboard's CPU type (775) but to install the cooler you will have to remove the motherboard and fit a retention plate on the back of the motherboard.

if you mean will the cooler fit in the case I'm not entirely sure. It should also fit in the case, but I'm not positive, i don't have this case so you'd have to check with someone else.

 

[point decay]

The Tuniq fits no problem with the stacker, unfortunately you can only use three of the four 120 mm slots on the plastic side fan holder as the tt extends too far on the top left