NAS4FREE iSCSI Multipath

ASE001

ASE001

ASE001

Associate
Joined
2 Jan 2007
Posts
277
Location
Stoke-on-trent
I'm trying to simulate a multipath connection to a SAN to test MPIO configurations on a Server 2008R2 build. The Srv2008 initiates the connection on both paths but I can only see the disk once? What I need is to see the same disk twice? Any ideas?

These are my current settings

Tag Portals Comment
2 1.1.2.1:3260
1.1.1.1:3260 iSCSI01

Tag Initiators Networks Comment
1 ALL 1.1.1.0/24
1.1.2.0/24 iSCSI01

Name Flags LUNs
iqn.ase.san:disk0 rw LUN0=/mnt/Data01/Data_tst_01.dsk
PG IG AG
2 1 none

Cheers
ASE001
 
oddjob62 said:
don't understand why you need/expect to see the disk twice.
Click to expand...

If the OS can see the same disk down two different paths (ie subnets), the OS should see the disk twice. Then you use MPIO (multipath I/O) which is part of Server 2008 Features that you can add to make the OS see it as a single drive.

It's all about High Availability systems, if one path fails then it uses the alternate path to the storage. NIC teaming is not recommended by Microsoft and they recommend a MPIO configuration for iSCSI. But never having used iSCSI in a production environment, only Fibre Channel I wanted to at least get familiar with the configuration.
 
Got it working by disabling each iSCSI NIC in turn, then in Disk Manager 'Rescan Disks' and then re-enable the NIC. The disk now appears twice although you can only bring one disk online at a time. The MS iSCSI initiator still only sees one target, not sure if this is correct or not, I need to think about this?

I then installed/enabled the MPIO feature from the server manage, then did a reboot.

I configured MPIO to support iSCSI which reported no errors after it did some automated configuration/discovery.

The second disk disappeared from Disk Manager as expected.

Disconnecting (disable iSCSI NIC) either of the iSCSI connections the disk still remains accessible.

I still need to do some testing, but it's looking good!
 
I more familiar with Fibre (HBS's) channel and you always see two disks in disk manager unless MPIO is installed. iSCSI should be the same and that's what I saw in my testing, although I had to jig it to work which I never had to do with Fibre channel.
 
oddjob62,
you seem to have experience of using iSCSI, how do you configure your NICs?

Jumbo frames = 9000
Set the Link speed to max, not Auto

also have you seen this http://support.microsoft.com/kb/2020559?

I also seen it suggested that you should also disable File and print sharing on the iSCSI NICs?

Any other settings I need to consider?
 
oddjob62 said:
RE the link, are you planning on using pass though disks?
Click to expand...

No it's a physical Active/Passive SQL cluster. That's why I'm keen to workout the optimal settings. I can't afford to have performance issues once it goes live, change control makes it painful to modify anything after that point!
 
You must log in or register to reply here.
Back
Top Bottom