NAT problems again with two wireless 360's

Don
Joined
23 Oct 2005
Posts
44,366
Location
North Yorkshire
My 360 has always had it's NAT 'open', ever since I got a wireless adaptor for my other 360 my NAT is now strict. The other 360's was moderate the last time I checked but the chances are it's strict too.

What's going wrong?

Both 360's have static IP addresses.
Mode is Auto 108mbps
I have forwarded both ports 88 and 3074 both outbound and inbound. "Inbound LAN Server IP address" what IP should i put here??

Cheers
 
Netgear DG834GT

I had a guide of how to forward the ports ages ago and I cant remmeber what IP addy it told me to input in the inbound rule.
 
You cant map the same ports to 2 seperate IP's though. Assuming the router is fully uPnP compliant, turn that on and let the 360 sort it.

Right, so what do I do? Leave everything as it is and enable uPnP?

Should I remove the port forwarding or anything else?
 
I had the DG834G and got that problem often when mates brought their boxes round. I have the GT now, UpNp was supposed to be borked on the G but I dont have two 360's to try it on the GT yet! :p

I flashed my GT to get rid of the crappy Sky BB firmware. I still haven't tested the other 360. Will do tonight..
 
I'll have a look for you mate, I know how frustrating it his when NAT's playing up!!

Has it only happened since you changed firmware ? IIRC you had both working ok before?

Well I flashed the firmware on the router then bought a wireless adaptor for the other 360 so I have no realy way of trying.

I think they were both Moderate on the old setup.
 
Back
Top Bottom