Need a favor, AOC U2868PQU issue.

Digital X · 26 Jun 2015 at 19:49

Just trying to narrow something on the AOC U2868PQU 4K monitor.

From my experience, my R9 290 when set at DP 1.2 at 60hz pops and flickers.

Has anyone with an Nvidia card (preferably 980 above) had no issues with this?

I'm considering an upgrade but don't want to be be having the issues I am, as I recall it was because the signal sent wasn't strong enough on the 290/X

Digital X · 26 Jun 2015 at 20:33

It's half the screen flickering and popping when set at 60hz. I know it's common but I don't want to upgrade to a 980ti IF it's not just an AMD issue.

Just to note, the pop sound is audible. As the screen is two stitched together, 1 side is OK, the other isn't.

Digital X · 26 Jun 2015 at 21:12

Ideally I'd like to know if 60hz works fine with a 980 or ti or if it's purely an AMD driver issue.

But thanks rroff.

Edit: Under the PIP Setting, audio is set to off already.

Digital X · 26 Jun 2015 at 21:17

Ok found the volume control on the buttons is now on 0. I might bite the bullet, buy a ti and see if that works. Thanks a lot guys.

Edit: Found an old 760, will test tomorrow and report back.