Need a New Case

Pudd

Pudd

Pudd

Associate
Joined
17 Jun 2013
Posts
8
So I need a new case. My current one is too small and I've had to perform makeshift case mods to fit in all of my components.

My biggest problem is the heatsink and the GPU.

Heatsink

GPU

PSU

Motherboard

I have one HDD, looking to upgrade to two later on, and one optical drive, looking to install a blu-ray one as well, at some point.

Thanks for your time.
 
The first one looks good, but it looks like a lot of dust would get in the grill at the front.
The second one is also good, apart from the USB array at the top, that looks kind of ugly to me, but I do like to see inside my PC, which this one allows more than the first one.
 
acme15 said:
If fan filters dont get clogged up with dust, and the insides of your PC don't get covered in dust, then your case wont be very good at cooling. Thats just the way it goes unfortunately. Dust is just a thing you have to deal with :p

The DemciFlex filters are great at reducing it though (but expensive)
Click to expand...

Badly worded :P
I mean due to the design of it, the deep grills, they look difficult to get into to clear the dust off, and while I know I can use compressed air, I like to avoid using that as much as I can, so would rather be able to access the fan exhausts or intake grills relatively easily with a cloth.
 
I know it's mainly about my aesthetic preference, but I'm mainly just looking at what sort of cases I can fit my system inside before I start forming opinions, if that makes sense. It's all well and good being able to find a case that I like the look of, but it's no good if I can't fit my stuff inside.
 
cypto said:
Understandable, however this might help you out a little.

For the gear you currently have you will be looking for..

1) Case with CPU cooler clearance for 160mm coolers.
2) Case designed for an ATX motherboard.
3) Case with removable fan filters (seems to be your personal preference)
4) Minimum of 2 optical bays.
5) Windowed side panel (again your personal preference going from your posts.)

Head to the OCUK site and search for "Windowed ATX Case" Look for a case that you think looks nice and you could live with then check in the specs for the CPU cooler clearance. Now I'm afraid to say the OCUK specs vary a lot case to case some don't even mention CPU cooler clearance. So take the case model and search in google "Case model CPU clearance." you'll find a site somewhere with a review mentioning this, remember you need a cpu clearance for a 160mm cpu cooler.

That in short is how even I would go about finding a suitable case for you. But because there are so many to choose from due to the rather basic requirements you need to do some of the searching your self.
Click to expand...

Thank you very much for that, it's very helpful. I'll take a look around for some cases, thanks :)

acme15 said:
My personal favourite is the Graphite 600T White, and I may even buy one very soon :D
Click to expand...

I do like white cases, but my partner who also uses the PC doesn't so it's a bit of a no-go area. That is a really nice looking case though :)
 
AeroCool XPredator X3 devil Red Edition - Can't find it on Overclockers, but I quite like this case, I've checked the dimensions and such for my equipment, and would like someone to double check it for me.

Thanks :)

Cypto, it's a nice case, but those handle bar things aren't really doing it for me, sorry!
 
I like the Silverstone Raven, but I think I prefer the AeroCool in general :)
Thanks for the recommendation anyway.
 
You must log in or register to reply here.
Back
Top Bottom