Ok so i just bought myself almost a whole new rig which consists of:
Amd 64 am2 x2 5000+
2gb Geil DDR2 PC6400
Abit KN9S mobo
BFG Nvidia 8800gts
I got it all setup and all seemed to be running fine but after about a day or so i was getting BSOD's every so often, although the system rebooted so i could not get any info from them as to the cause.
This was quite rare but non the less quite a worry as this was not somthing i have had with any of my past builds.
I then came home last night and turned on my rig, it booted to Windows and all seemed fine. I then got up to leave the room and the rig just turned off, There was no blue screen of death but more like a sudden loss of power and i could not turn it back on as the power button was totally unresponsive.
After a little tinkering this afternoon i have noticed that if i take out the kettle lead from the PSU and wit for the charge in it to die then plug it back in i can boot the rig once but it will shut down again shortly after booting to the desktop where it again dies. This can be rinsed and repeated and works every time so my guess is that its an issues with the PSU but i cannot be sure.
Just looking for a little advice on this and some expert opinions before i go and blow another ton+ on a new PSU, The one i have now is a Hiper 580w ( http://www.overclockers.co.uk/showproduct.php?prodid=CA-005-HP ).
Also not too sure if this would be adequate for my rig as i have heard mixed rumours that the 8800gts is quite power hungry and on top of the above spec i have 2 DVD writers and 3 SATA HDD's along with 3 case fans.
Sorry about the rant guys, Just wanted to be as detailed as possible and any info/direction would a massive bonus!
Thanks in advance guys,
Mef.
Amd 64 am2 x2 5000+
2gb Geil DDR2 PC6400
Abit KN9S mobo
BFG Nvidia 8800gts
I got it all setup and all seemed to be running fine but after about a day or so i was getting BSOD's every so often, although the system rebooted so i could not get any info from them as to the cause.
This was quite rare but non the less quite a worry as this was not somthing i have had with any of my past builds.
I then came home last night and turned on my rig, it booted to Windows and all seemed fine. I then got up to leave the room and the rig just turned off, There was no blue screen of death but more like a sudden loss of power and i could not turn it back on as the power button was totally unresponsive.
After a little tinkering this afternoon i have noticed that if i take out the kettle lead from the PSU and wit for the charge in it to die then plug it back in i can boot the rig once but it will shut down again shortly after booting to the desktop where it again dies. This can be rinsed and repeated and works every time so my guess is that its an issues with the PSU but i cannot be sure.
Just looking for a little advice on this and some expert opinions before i go and blow another ton+ on a new PSU, The one i have now is a Hiper 580w ( http://www.overclockers.co.uk/showproduct.php?prodid=CA-005-HP ).
Also not too sure if this would be adequate for my rig as i have heard mixed rumours that the 8800gts is quite power hungry and on top of the above spec i have 2 DVD writers and 3 SATA HDD's along with 3 case fans.
Sorry about the rant guys, Just wanted to be as detailed as possible and any info/direction would a massive bonus!
Thanks in advance guys,
Mef.
Last edited: