Need an overclocker's opinion.

[mattius1989]

Ok, so I have just overclocked my 1055t from 2.8 to 3.5. All I did was bring up the FSB until the CPU speed was up to 3.5, brought the NB up to 2.0 and brought the RAM which had increased back down to 1333. Turned off cool n quiet and turbo core. All booted fine and went up to 40c maximum in an occt stress test.

All the voltages were left at auto. This was all done based on a guide on YouTube. Does al this sound stable?

Also, it said about ganging unganged memory... Should I do that? Thanks in advance.

 

[EniGmA1981]

If it passed OCCT then it should be ok... 'auto' can sometimes pump WAY more voltage through the CPU than it needs though... Ideally you should set the vCore manually to the lowest you can so it'll still pass 10 hours of prime95...

 

[SeraphX]

try starting with a vcore of 1.4v, that should be plenty for a x6 at 3.5Ghz, then work your way back like Enigma said, so, 1.375-1.350 etc etc