Need case to house Asus P4SC-EA board

mattm591

mattm591

mattm591

Associate
Joined
12 Mar 2007
Posts
9
Need small case to house Asus P4SC-EA board

Hi.
I have an old motherboard, it's an Asus P4SC-EA board which originally came in an Asus Terminator P4 553A barebones system.
I beleive the board is Micro-ATX although the manual doesn't actually say (it does give its dimensions - 23cm x 22.4cm) and I tried purchasing a generic micro atx case which wouldn't fit it, firstly because the holes were drilled in the wrong places and secondly the metal thing (I don't know the technical term) which the connectors poke out of at the back wasn't the right style either.
Does anyone know of a case which could house this mobo, preferably cheap and with a psu.
Thanks a lot.
Matt
 
Last edited:
As far as i'm aware of any case should house the motherboard you need to remove the i/o plate(the thing that the rear connectors poke through) from the asus case as this is specific to your motherboard & fit it to your new case.The only other thing regarding mounting holes is that the asus motherboard is built to fit the terminator case only?
 
Last edited:
mattm591 said:
The I/O plate is not removable though, it is part of the original case.
Click to expand...
Usually they can be pushed through from the back out through the inside of the case. If you can't remove the I/O shield from the old case you need not be overly concerned as it's not essential to the function fo your new case.
 
Ok then. I will try another case then and hope for the best, I was just a little uncertain as the case I did order didn't fit the motherboard.
 
You must log in or register to reply here.
Back
Top Bottom