need help cpu-z is saying my ram is different

xnusense · 3 Sep 2010 at 22:37

i'm running 3 x 2GB corsair 1600mhz dominator

xnusense · 3 Sep 2010 at 23:11

its all set to auto

thks for the quick help

xnusense · 3 Sep 2010 at 23:28

Thks but there is nothing in the bios that even says xmp i have the asus p6x58d-e i can just turn the speed up to 1600mhz by dram frequency but the stick in slot 3 stays at a lower clock then the other two in slot 1 and 5

xnusense · 3 Sep 2010 at 23:48

I Have the manual here i can send it to your hotmail if thats ok with you

xnusense · 3 Sep 2010 at 23:56

i've sent it to you thanks a lot for your help

xnusense · 4 Sep 2010 at 00:11

yep its still saying the same thing

cept for this

xnusense · 4 Sep 2010 at 00:20

Corsair 6GB (3x2GB) DDR3 1600MHz XMS3 Dominator Memory CL8(8-8-8--24) for i7 Motherboards

General
Storage Capacity 6 GB ( 3 x 2 GB )
Upgrade Type Generic
Memory
Type DRAM
Technology DDR3 SDRAM
Form Factor DIMM 240-pin
Memory Speed 1600 MHz ( PC3-12800 )
Latency Timings CL8 ( 8-8-8-24 )
RAM Features Intel Extreme Memory Profiles (XMP 1.2), aluminium heatsink, Dual-path Heat Xchange (DHX)
Supply Voltage 1.65 V
Expansion / Connectivity
Compatible Slots 3 x memory - DIMM 240-pin
Manufacturer Warranty
Service & Support Limited lifetime warranty

xnusense · 4 Sep 2010 at 00:31

ive only ran prime95 for about 30mins so far no problems but ive done a lot of gaming and run windows memory diagnostic with no propblems at all aswel

xnusense · 4 Sep 2010 at 09:50

yep all the sticks say the exact same thing 1600mhz they are all exactly indentical this is so wierd i even just switched the sticks around and now slot 1 has the 1333 stick

xnusense · 5 Sep 2010 at 01:51

Ok ppl i just ran prime95 blend test for 4 1/2 hrs with no problems and then ran memtest till 630% which took about 5 hrs and no probs what so ever. so what should i do i havent got the time or patience to send them off and wait and thks for all the help aswel

xnusense · 5 Sep 2010 at 16:46

Now i've got a massive problem i realy need help now, heres the story right i done all them tests yesterday as you can see above, now today i got 3dmark start running it then half way through my whole pc freezes nothing would happen so i had to reset it then no picture would come up at all my monitor was not even picking it up so i turn the power supply off and back on that sorted the no picture problem but then i went into my bios and it stopped responding while i was in the bios so i had to restart it again and it done the same thing with the picture not coming up. so i got it going again and now all my bios settings have reset themselves and i cant enable xmp now either so i thought it was definatly the ram but now i've got back into windows its saying there was a video hardware error which is wierd cause i've been playing games for a week now with no problems at all its got to be the ram?? so wierd with all the testing i done yesterday with nothing happening plz help