Need help

Associate
Joined
7 May 2011
Posts
156
Location
N.Ireland
Hey guys, I have a main question to ask

Will a Corsair H50-1 (water cooler) fit inside a Antec 300 case ?

At the moment my system is inside a Coolermaster Elite 334 Midi Case.
I know, This is a VERY amateur build and there is NO cable management at all.
everything is Squeezed into this case and i am going to add ram, storage and a bigger case.

Any tips you guys can give me on how to improve this case apart from the obvious bigger case and cable management, Thanks.

My system is:


  • AMD Athlon II X4 Quad Core 640 3.00GHz (Socket AM3)
  • Powercool 750w
  • Corsair H50-1
  • HIS HD 5770 turbo
  • Asus M4A77T/USB3 AMD 770 AM3 Motherboard
  • Corsair XMS3 4GB (2x2GB) DDR3 PC3-12800C9 1600MHz Dual Channel Kit


DSCF1516.jpg
 
Yeh, Good idea on the optical drive positioning.

As for the 100 case its taller than the 300 but the 300 is wider.


and its only £10 difference

do I need hieght or width. Its only about an Each difference, but every inch counts i guess.
 
not to sure about the powercool psu id replace that if it was my rig

Yeh, At time I had already gone over my budget so I just got a cheap one that would power the system. So far its done me well and the only problem I had was that I needed the converter to hook up the mother board.
 

Ah thank you.
Don't know how I managed to miss those.

I'm trying to work out what cables I need to make my pc run.
These PSUs dont tell you what they have. Is there a standard basic set of cables every psu comes with or am i just being dumb ?


edit:

Found the cooler master one connectors.

20+4 Pin
1 x 4+4pin CPU +12V
5 x 4pin Molex
2 x 6+2pin PCI-E Power
1 x FDD Power
6 x SATA Power

Can anyone tell me if this is enough to connect and power up my pc ?

After upgrade i'll be running

  • AMD Athlon II X4 Quad Core 640 3.00GHz (Socket AM3)
  • Powercool 750w
  • Corsair H50-1
  • HIS HD 5770 turbo
  • Asus M4A77T/USB3 AMD 770 AM3 Motherboard
  • Corsair XMS3 4GB (2x2GB) DDR3 PC3-12800C9 1600MHz Dual Channel Kit x2
  • Samsung SpinPoint F3 1TB SATA-II 32MB Cache x2
  • Sony Optiarc AD-5260S 24x DVD±RW SATA ReWriter
 
Last edited:
Can anyone tell me if this is enough to connect and power up my pc ?

After upgrade i'll be running
AMD Athlon II X4 Quad Core 640 3.00GHz (Socket AM3)
Powercool 750w
Corsair H50-1
HIS HD 5770 turbo
Asus M4A77T/USB3 AMD 770 AM3 Motherboard
Corsair XMS3 4GB (2x2GB) DDR3 PC3-12800C9 1600MHz Dual Channel Kit x2
Samsung SpinPoint F3 1TB SATA-II 32MB Cache x2
Sony Optiarc AD-5260S 24x DVD±RW SATA ReWriter
 
Back
Top Bottom