Netgear DG834G v3 with BE*?

ONESHOTKILL · 16 Apr 2009 at 20:52

does anyone know if you can use DG834g v3 with be unlimited? i tried plugging mine in but it connects and tells me my line stats but no web pages load.

iMacMart · 16 Apr 2009 at 20:56

I have a D834GTv3 no issues?

lee87 · 16 Apr 2009 at 21:01

Typed the username and password correctly?

iMacMart · 16 Apr 2009 at 21:03

lee87 said:
Typed the username and password correctly?

You don't need username and password to connect to Be*?

Have you cloned the MAC address of you Be* router?

ONESHOTKILL · 16 Apr 2009 at 22:00

tweakinfreak said:
You don't need username and password to connect to Be*?

Have you cloned the MAC address of you Be* router?

nope,i know its worked with this router before because when i changed from my old isp the line was activated and this router worked but for some reason i put the bebox on.I tried a couple months ago to get the netgear to work again but i had same problem so i thought it must not be fully compatible

iMacMart · 16 Apr 2009 at 22:16

ONESHOTKILL said:
nope,i know its worked with this router before because when i changed from my old isp the line was activated and this router worked but for some reason i put the bebox on.I tried a couple months ago to get the netgear to work again but i had same problem so i thought it must not be fully compatible

Been over to the Be* forum to check there?

They have all you need to know and are very helpful?

Wicksta · 16 Apr 2009 at 23:56

Turn the old router off and leave it unplugged for about an hour and then try the new router. Either that or clone the MAC address.

iMacMart · 17 Apr 2009 at 07:38

You have internet explore set to "automatically detect settings" don't you?

edGfaCTor · 17 Apr 2009 at 07:41

I hope this helps you out

http://www.beusergroup.co.uk/techno...the_Netgear_DG834.2FDG834G.2FDG834GT.2FDG834N

That router is known to not be that good a lot of reports of issues with it when used on BE.

DJMK4 · 17 Apr 2009 at 16:13

Iv got a sky branded (but unbranded/unlocked) DG834GT with DGTFirmware on my Be* connection, works fine and dandy for me.

iMacMart · 17 Apr 2009 at 17:09

DJMK4 said:
Iv got a sky branded (but unbranded/unlocked) DG834GT with DGTFirmware on my Be* connection, works fine and dandy for me.

I think the GT's are fine its the 'G' that may have issues

smogsy · 17 Apr 2009 at 17:26

G don't work GT do.

tipsy · 19 Apr 2009 at 07:24

well my v2 works but doesnt give me full speed unlike my GT.. just incase hard reset the router & input this again, link below

http://www.kitz.co.uk/isp/beO2setup.htm

Kev!