New Build issue please help

Specs?


Is it switched on at the wall?

Is there a switch on the back of the PSU?

Have you plugged the 24pin and 4/8pin ATX (near CPU) connectors in?

Are you using a GFX card? does it have all power connectors filled? are you connecting the monitor to the card and not a motherboard GFX solution?

Is the POWERSW cable from the case in the right place? use a screwdriver tip to short the same two pins quickly.

Is there any signs of life? fans trying to move, a light on the motherboard?

ClearCMOS.
 
Last edited:
intel i7 2700k
HD Radeon 6950 iceQ x
kingston hyper x 8gb ram
xfx 850w psu asus p8z68 v gen3 mobo
everything is 1155 socket
and yes to all your questions i am lost and have no idea my friend helped me build it the speeker is not giving out any beeps
 
Check the power cable for the PSU (fuse?)

Remove the 6950 and plug the monitor into the back of the motherboard directly.

Use a single stick of ram/try each slot.

Disconnect the drives.

Use a screw driver to short the two pins for the power button.
 
once again everything is in right place lights on the motherboard, fans spin up gfx fan spins, cpu fan spins etc. theres no image on monitor, which is connected to gfx card
 
The 6950 require two 6pin PCI-E connections, have you got both in and not just one?

What monitor is it? some Dells for example require you to switch between the inputs manually.
 
the mobo has a power button on it, there is a single beep when you turn the pc on turns out peeker wasent in correctly
 
dont worry sorted it sorry for the hustle, just changed the video input -.- you can tell im new to pc's
 
nope my buzz just got stomped to the ground. coming up no hdmi no signal once plugged into gfx,its fine when i plug it to the mobo
 
Thank you very much
smile.gif
 
You must log in or register to reply here.
Back
Top Bottom