new build no display on boot

Ezekiell

Ezekiell

Ezekiell

Associate
Joined
19 Feb 2009
Posts
16
Ok got my new build today 4770k h100i Z87 sabertooth gtx770 hx850w and corsair vengeance pro 16gb 2400mhz as far as I know there is no problems with the parts working together. ive put it all together and on boot everything lights up but no display come up on screen I've tried a different graphics card and the on board display but nothing there are no beeps on boot to say anything.
I've checked all the power connections and they are ok does anyone have and idea before I remove the CPU cooler to check for bent pins as I don't have any past I old like to save my self some problems. Thanks
 
Try a CMOS reset, sometimes helps.

You have installed the 8 pin for CPU power, this often gets missed.
 
Ok after looking again the dram led is lit up I've tried the memok button but that doesn't help I've tried just one stick in and moving both to slots 2 and 4 no change light stays on. Is the memory faulty or is there something I else I need to do to get them to work with this board . Just try some older memory from my other pc that I know works still the same the dram led stay on so maybe not the memory.
 
Last edited:
Right checked the CPU no bent pins that I could see 8 pin power is in tried to update the bios with the flashback button but the doesn't even light up thing mb may be the problem.
 
Ok had it boot to bios left thing at there defult saved and restated.
Now the pc starts up restarts twice the nothing no bios again I caught something at one point about the pc having to shut its self down think its was maybe the overheat message but the time I was in bios it was sitting at 27 to 30.
 
is that with bare minimum install? (oops sorry confused you with another thread)

feel to see if the pump is vibrating in the h100,how long did you sit in the bios?
 
I can feel so vibration from the pump don't know how it's ment to feel, was in bios for about 2 mins just really to load defaults etc pc is no longer restarting just sits with the fans going and no display.
 
sound like ram if u had led on... do you have any lower mhz ram to try and maybe update bios?

i see this on your board specifications
4 x DIMM, Max. 32GB, DDR3 1866/1600/1333 MHz Non-ECC, Un-buffered Memory

think dram voltage or nb needs increasing if im thinking right so that it can run at 2400mhz
 
Last edited:
Yeah I tried it with some slower memory and it was still doing the same.
I did manage to update the bios the last time it worked and loaded the XML profile that should up the voltage if its running at its to speed correct me if I'm wrong.
 
Ok I had it posting a couple of times after I hit the memok button the memory was showing at 1333 I've left it st that just to see if it would stay stable.
It's crashed once on boot saying overclock failed when there is no overclock just default or lower its now just sitting with no display fans running and no warning lights. So I've tried different memory or just one stick I've tried on board graphics and anther card I'm stumped.

Ok I've moved the memory to slots 1 and 3 and it boots If I load the XML it doesn't boot I hit the memok it load says the profile is good restarts and no go I have to load the default profile.
At the moment it's booting to bios with mem in slots 1 and 3 default profile and I'm installing windows
 
Last edited:
Lol ok installed window restarted plugged extra hds in and it now keeps restarting not even getting to boot bios maybe its the power supply going to unplug the hds ans see what happens.
 
You must log in or register to reply here.
Back
Top Bottom