New build not working! Help!

swhile

swhile

swhile

Associate
Joined
16 Jan 2007
Posts
59
I've finished building my dad's new PC and I turned it on for the first time today expecting to find that everything went according to plan.

I was worried to find that nothing appeared on the monitor and I left the system on for two or three minutes. No change. I've checked the monitor is plugged into the power socket and the VGA cable is plugged into the graphics card's VGA socket. The monitor's standby light (amber) stays on.

The graphics card is a GeForce 8600 GT and from what I can see is seated in the PCI Express slot correctly and requires no power directly from the PSU. If somebody could help i'd be very grateful :(
 
do u get any beeps from the mobo at all?

what parts new all of it?

have you tested it with any gfcard

have you check everything is in the right place cpu fitted properly and power leads going to the right places
 
do u get any beeps from the mobo at all?

what parts new all of it?

have you tested it with any gfcard

have you check everything is in the right place cpu fitted properly and power leads going to the right places
Click to expand...

I don't get any beeps at all.

All of the parts, apart from the sound card, are brand new.

I've only tested it with this graphics card. Will try another.

CPU is seated fine with stock heatsink and power connections look ok.

The 4 pin 12v from the PSU is plugged into the motherboard?
Click to expand...

The motherboard is an Asus P5K Premium and I've used the 24 pin power connector.
 
There is an extra 4 pin or 8 pin socket by the cpu have you got anything plugged in there.
 
No nothing is plugged in there. I've noticed on my pc that my stock cooler has a power plug that goes into a socket around that upper area on the motherboard. This quad core cooler does not have one.

Just reseated the graphics card and still nothing.
 
swhile said:
No nothing is plugged in there. I've noticed on my pc that my stock cooler has a power plug that goes into a socket around that upper area on the motherboard. This quad core cooler does not have one.

Just reseated the graphics card and still nothing.
Click to expand...


Plug in the 4 Pin cable near the heatsink from the PSU and it should post !
 
the cpu cooler should have a fan header on a small fan header on it make sure t hat is in,

also make sure the extra cpu power connecter is in as the others have mentioned its a small white socket in top left corner of board may have half of the 8 pin sockest blocked off with a black cap. your psu should have a 4pin power lead that goes in the 4 exposed ones
 
Ok great i've plugged in the a 4 pin connector from the PSU into that socket and the image has come on the monitor. When loading up the BIOS screen it comes up with this:

"Unknown CPU detected, updaing BIOS is required to unleash its full power!
No IDE Master HDD detected!
Chassis Intruded!
Fatal error....system halt"

The CPU is a Q9450 2.66GHz and the motherboard supports quad cores.

I didn't put in any IDE hard drives, just two 500GB SATA drives.

I have no idea what to do now :(
 
Do a CMOS reset if you have not done so already.
See if you can check what revision BIOS you are using and check against Asus website, you may need to upgrade to a later BIOS in order for the motherboard to reconise the chip.

Rob
 
I've just cleared the CMOS I think. I removed the lithium battery and fiddled with a jumper the way my mobos manual tells me to.

It now boots up differently, it doesn't show the ASUS image anymore and instead it lists the all the devices in the system I think. It then says:

"Reboot and select proper boot device or insert boot media selecting boot and press any key."

From here do I just go into the bios setup, format the hard drives and then set one of the dvd drives as the boot device with the Windows XP disc inserted?

Do you reckon I need to still update the BIOS?

I thought this would all be easy and go to plan like it did when I built my PC so sorry for all this trouble :( Thanks for your help.
 
Nope just when I thought things were looking up it came up with a previous message like before.

I just updated the BIOS with the newest version and backed up the old one with a floppy disk. After installing the BIOS I went into BIOS setup and set the priority boot device as the dvd-rom drive. After this I put the XP disc in and reboot the system.

Now it's auto detecting all the devices, lists them all and displays the message:

"No IDE Master H.D.D detected!
Fatal Error...System halted"

Really don't know where to go from here.
 
I read on here the other day about setting the Hard disks to IDE in the bios if you are using a sata drive?

Could be totally wrong so please check with an other member first.
 
You must log in or register to reply here.
Back
Top Bottom