New Case won't turn on after working

an4rew

an4rew

an4rew

Associate
Joined
12 Jan 2006
Posts
57
Location
Northern Ireland
I just moved my computer from a broken Antec 300 to a Coolermaster Elite 360 case.

Everything worked first time and i was playing some games, temps looked fine but i did notice some screen tearing while gaming.

But after i shut it down now it fails to even start, the power led lights up and stays on but i hear nothing.

Motherboard is an Asrock a770de, i don't think theres anywhere to plug in a ground.
Help?
 
Try clearing the cmoss see manual, make sure everything is connected properly push down on the GPU + Memory to make sure they are making proper contact in their slots and check wiring again.
 
not powering up

Try removing all the add on cards, h/disks and anything else barring the processor and memory ( obviously :-) ) and try booting the pc, also check the case wires connected are on the correct pins (probably not the cause but won't hurt by double checking), also make sure any jumpers are in the correct places on the motherboard as one may have become dislodged during the swap, sounds like a bad connection on one of the add on cards if the truth be known though, if that fails then swap around the memory sticks but put them in and test them one at a time, which would also check them for one gone bad or just a bad connection, if a bad connectoion is the cause, I would normally clean the contacts with a "dry" lint free cloth (static protection also required at all times as we all know) hope this helps,

Mole
 
You must log in or register to reply here.
Back
Top Bottom