New gun & snow lance help

Looks like you have a 1/4" male to male adapter on the outlet of the SGS35 gun. That needs to come off.

What you need is to put the female 1/4" quick release on the outlet of the gun and the male 1/4" quick release on the end of the foam lance. There are a few adapters you have that are superfluous to requirements there. (Kew/alto male quick release, unless you have the female end and the 1/4" male to male)

As I have the same gun but a different lance, this is what you should have.


The male 1/4" quick release is on the end of the blue adapter on mine. This should go directly into your PF22 lance. The threads on all of these will need sealing with either PTFE tape or loctite.
 
Last edited:
dLockers said:
You know your jet wash "stick" that you had with the Nilfisk?

It breaks in half - your snow foam lance attaches to one half of it.

Edit: Poor pic, but see here:

https://inspiredautomotive.co.uk/wp-content/uploads/2021/01/snow-lance-scaled.jpg

Edit: slightly better pic:
https://i.ytimg.com/vi/sfx_6wPaCEY/maxresdefault.jpg

i.e. dont attach the snow foam to the trigger bit.
Click to expand...
Kei said:
Looks like you have a 1/4" male to male adapter on the outlet of the SGS35 gun. That needs to come off.

What you need is to put the female 1/4" quick release on the outlet of the gun and the male 1/4" quick release on the end of the foam lance. There are a few adapters you have that are superfluous to requirements there. (Kew/alto male quick release, unless you have the female end and the 1/4" male to male)

As I have the same gun but a different lance, this is what you should have.
The male 1/4" quick release is on the end of the blue adapter on mine. This should go directly into your PF22 lance. The threads on all of these will need sealing with either PTFE tape or loctite.
Click to expand...

Thank you both so much for your great replies! I'm at work currently so will try again when I get home :)
 
You must log in or register to reply here.
Back
Top Bottom