New memory ready for Ivy Bridge-E - what to get ?

Associate
Joined
20 Nov 2009
Posts
2,050
Location
Haarby, DENMARK
No doubt, sooner or later I'll get an 4930K, but now with the "horror" scenario of rocketing RAM prices, I think I would be most sensible to get the compatible memory in the house ASAP for the Ivy Bridge-E. I know this new CPU is going to support 1866Mhz native, but the big question is what kind of memory should it get ?

1) The demand is low-profile (no tall heatsinks) on the Ram.
2) At least be able to run 1866Mhz at 1.5v (1.6 max)
3) Be 4x4GB sticks so perhaps a set of two.

I have no intention of major OC.
I'm going to spend max £150 - preferably less :p

The motherboard used is an Asus P9X79 Pro.

I have been looking at the following kits both 1866Mhz and 2133Mhz since they're basically the same price:

A) 16GB DDR3 G.Skill Ares Series Quad channel memory kit, comprising 4x4GB modules. PC3-17000 memory, 2133MHz with timings of CL11 (11-11-11), 1.6V. Low profile memory modules (height of 32mm / 1.26 inches) with new style Ares heatsinks. Intel XMP ready.
£123.

B) 16GB DDR3 G.Skill Ares Series CL9 quad channel memory kit, comprising 4x4GB modules. PC3-17000 memory, 2133MHz with timings of CL9 (9-11-10-28), 1.65V. Low profile memory modules (height of 33mm / 1.30 inches) with new style blue Ares heatsinks. Intel XMP ready.
£141.


C) 16 GB (4x4GB) G.Skill ARES LP DDR3-1866 C9 , DIMM 240-pin, Low Profile, DDR3, 1866 MHz / PC3-14900, CL9-10-9-28, 1.5 V. Low profile memory modules (height of 33mm / 1.30 inches) with new style blue Ares heatsinks. Intel XMP ready.
£117.


What would be the best choice and are the others to consider ?
 
Last edited:
I'm in the same boat as you mate, I've just ordered the Asus Rampage IV Black + 4930k.

I have no clue what ram to order, I'll be OC'in but not silly numbers. I have a higher budget but I need to stay sensible. For cosmetic reasons I need to stick with black or red heat spreaders though.

Option C looks good
 
I'm in the same boat as you mate, I've just ordered the Asus Rampage IV Black + 4930k.

I have no clue what ram to order, I'll be OC'in but not silly numbers. I have a higher budget but I need to stay sensible. For cosmetic reasons I need to stick with black or red heat spreaders though.

Option C looks good

For performance OC ability, check this out:-

Kingston HyperX Genesis 8GB (4x2GB) DDR3 PC3-19200C11 2400MHz Dual/Quad Channel Kit @ £89.99 inc VAT

MY-117-KS_400.jpg


nonl2brKingston's KHX2400C11D3K4/8GX is a kit of four 256M x 64-bit (2GB) DDR3-2400 CL11 SDRAM (Synchronous DRAM) 1Rx8 memory modules, based on eight 256M x 8-bit DDR3 FBGA components per module. Each module kit supports Intel® XMP (Extreme Memory Profiles). Total kit capacity is 8GB. Each module kit has been tested to run at DDR3-2400 at a low latency timing of 11-13-11 at 1.65V. The SPDs are programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. Each 240-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:<br>
<br>
Features:-<br>
- JEDEC: DDR3-1333 CL9-9-9 @1.5V<br>
- XMP Profile #1: D3-2400 CL11-13-11 @1.65V<br>
- XMP Profile #2: D3-2133 CL11-12-11 @1.65V<br>
- Model Name: KHX2400C11D3K4/8GX<br>
- Main Board: INTEL<br>
- System: DESKTOP<br>
- System Type: DDR3<br>
- M/B Chipset: INTEL P67, INTEL X68, INTEL Z77, INTEL X79<br>
- CAS Latency: 11-13-11-31 2N<br>
- Capacity: 8GB (2GBx4)<br>
- Speed: DDR3-2400 (PC3-19200)<br>
- Test Voltage: 1.60-1.65V<br>
- Registered/Unbuffered: Unbuffered<br>
- Error Checking: Non-ECC<br>
- Type: 240-pin DIMM<br>
- Warranty: Lifetime<br>
<br>
<br>
<iframe width="560" height="315" src="http://www.youtube.com/embed/39Dg72gy28c" frameborder="0" allowfullscreen></iframe>


Only £89.99 inc VAT.

ORDER NOW















Or capacity at a good price check this out:-


Patriot Intel Extreme Masters 16GB (4x4GB) DDR3 PC3-12800C9 1600MHz Quad Channel Kit (PVI316G160C9QK) @ £109.99 inc VAT

MY-069-PA_400.jpg


The Intel® Extreme Masters (IEM) Memory, a limited edition kit designed with true performance and gamers in mind. These modules are hand tested and compatible with the latest Intel® DDR3 platforms to ensure stability for the most intense gaming environments. The Intel® XMP Certification ensures a seamless gaming upgrade and experience.

The Intel® Extreme Masters, Limited Edition utilizes the Viper 3 variation design for its heat dissipating capabilities for superior performance to ensure rock solid stability even when using the most taxing applications. Built with the highest quality of components, we back our memory with a lifetime warranty.

Available in dual and quad channel kits, 8GB, 16GB and 32GB Kits, Patriot Memory’s IEM Edition will be offered at speeds from 1600MHz up to 2133MHz at 1.5 volts. This exclusive memory by Patriot Memory will only be available during Season 7 show of IEM. Visit www.intelextrememasters.com for more information.

Features:-
- Extreme Performance PC3-12800 (1600MHz)
- Low Latency (9-9-9-24)
- Voltage: 1.50-1.60V
- XMP Ready
- Equipped with an extruded aluminum shield build around a copper core to provide improved cooling
- 100% Tested and Verified
- RoHS Compliant
- Tested on Intel 6 & 7 series platform
- Lifetime Warranty


Only £109.99 inc VAT.

ORDER NOW






Or as there is more choice in dual channel kits, just buy a pair of dual channel kits, as they shall run in quad channel fine. :)
 
Back
Top Bottom