New pc build, no signal to monitor :(

[Mogzy626]

Hey,

I was looking for a bit of advice before my next step, which is to visit a PC repair shop. Long story short, this is my third personal PC build. I have quite a clear knowledge on building them and my previous 2 builds worked straight away. With this current build, I have connected everything up, the PC powers on but there’s no signal to the monitor. I have spent a few hours testing different parts. First I thought it may of been the CPU, as I left it run for a few minutes, and then looked at the CPU, the thermal paste looked unheated. I then ordered another CPU online, same problem, so it’s the not the CPU. Iv tried different rams sticks, even no ram sticks, nothing. I’m totally stumped.

Please can I borrow someone’s wise mind, i just want to get my moneys worth now and actually have a working PC .

There’s no bios, I can’t hear any clicks when I plug audio in. Tried the monitor with my PlayStation works fine, also different cables

My specs are

CPU - Intel i5 9600k

Mobo - msi b365m pro-vh ddr 4 matx

Ram - Corsair vengeance 16gb 2x8gb

Ssd 500gb

Hdd 2tb

Gpu - msi 1660 super venture Xs oc

Case - cas-520 xigmatek

CPU cooler - aerocool Cylon 4

Psu - EVGA 500w

 

[adrichardson81]

Are all the fans spinning up? Any debug LEDs lit up?

My best guess, given you've tried 2 CPUs, is the mobo.

Does your CPU have integrated graphics? If so, hook your monitor up to that and remove your gpu.

 

[Slinky69]

Does the mobo have a 2nd PCI slot to try the GPU in?

 

[Hakanese]

Recheck all the cables are seated properly into psu, mobo and gpu. Try different output from gpu

 

[benjii]

Did you make sure to use the gold risers for the motherboard? Does anything get power when you turn it on? If not, try starting the PSU with a paperclip and see if it starts up ok.