new set wont go over 1.1v

[stoffeldanny]

hello guys , i boucht a new ddr5 set but it wont let me increas ddr vdd or vddq ,not even to 1.11.
Xmp didnt boot so i tryd getting enything more then 4800 out of it but after a week trying im stuck .
i can change al vallues no problem , i can change Vdd and Vddq from auto to 1.1 also but i cant increase becous then it wont boot .

Corsair VENGEANCE DDR5 RAM 32GB (2x16GB) 6400MHz CL36 Intel XMP on
Gigabyte b760m aorus elite
i414700kf (not a verry good one )

its on the list and installed correct , i tryd 1stick also ,i tested the dimms .
the previous set did xmp and voltage fine tho but 1 broke.

Sorry if im forgetting stuff guys im new


edit, i also noticed that in gigabyte control center the setting to change vdd/vddq was greyed out whyle not with the previous set

 

[JollyJamma]

Have you updated the motherboard BIOS?

 

[stoffeldanny]

Have you updated the motherboard BIOS?

yes , i also tryd with optimized default profile in bios .
If a leave all settings at default and after i make sure it boots , i cant increase vdd by 0.01 or i a boot loop.

 

[stoffeldanny]

Tis is resolved .
in gigabyte bios there is a setting called 'program mode' in advanced ddr5 voltage control .
This must be set to enable to make the ram accept vdim changes apperently.
Not auto or disable becous then i get a 3s psu restart loop on boot .

It could be me but i didnt find this is explaind enywhere verry whel that they start out locked from manual vdd changes .