New to Watercooling

[tezza1982]

Hi everyone I have just finished my first full watercool setup. I was a bit unsure about running 2 GTX680s and a 3770k on a skinny 240 rad and a phobya xtreme 200 rad ( I have a 600t and this is the maximum radiators I could fit) as some said it wouldnt be enough. Anyway Ive gone ahead and set it up anyway and Im running a modest 4.4 ghz CPU overclock and stock GPU speeds, this is just to test before I start cranking it up.

Anyway Ive ran lots of benchmarks and I have had a looped 3d mark 11 which maxes both GPU and CPU together, my max temps are 49C on the CPU and 52C on the GPU - thats after 1 hour of a looped test with full CPU and GPU load.

Would you say these are decent for a water cool setup?

Thanks

TC

 

[opstrat]

I would be happy with those temps. what fans do you use?

 

[OptimaLnrg]

What fan are you using for the 200mm radiator?

 

[tezza1982]

I would be happy with those temps. what fans do you use?

Im using the corsair quiet edition static pressure fans for the roof rad

What fan are you using for the 200mm radiator?

Just the stock 200mm thats in the front of a 600t

 

[RichH]

I'm going to do a similar loop for my 600t, but I'm not going to put my CPU in the loop. Are your GPUs overclocked? What temps do you get in Heaven?

 

[Toothy1911]

Those temps look good. I have the exact same rad setup in a Corsair 650D. May I suggest swapping the Corsair front fan for a BitFenix one.

 

[WJA96]

Those temperatures look very good indeed. I assume that's the "total" CPU sensor you're quoting. Do you know what the CPU and GPU core temperatures are?

 

[zx|muppet]

cpu temp seems very very cool for the temps we have at the moment!