New water cooling system/ radiator mount help

blackd834 · 5 Apr 2013 at 14:27

I am building a water cooling system and i am not sure where/ how to mount the radiator to the out side of my case. The case i have is Lian Li PC-7FNWX Aluminium Mid Tower Case i have seen that i can mount it to the back using the 120mm fan slot but i have this Corsair Hydro H80i High Performance Liquid CPU Cooler mounted to the inside of my case and as it is new i don't what to take it off and add the cpu the water cooling loop at this time.

Here is a list of all the items i am getting for my water cooling is there any other items i need or items that i don't need?

OcUK Tech Lab H2O Custom GTX 680 2048MB GDDR5
Options applied to the above product:
Aqua Computer AquagraFX - GTX 680 Water Block[/URL]

Hardware Labs Black ICE Radiator SR1 360
XSPC X2O 750 Dual Bayres/Pump (Black) V4
BitFenix Recon Internet-Connected Fan Controller (Black)
DEMCiflex Dustfilter Set for 360mm Radiator - Black/Black
Akasa AK-178-BL 12" Cold Cathode - Blue x2
Bitspower Premium G1/4" Black Sparkle High Flow 3/8" (1/2" OD) Compression Fitting x6
BitFenix Alchemy 6-Pin PCIe Extension 45cm - sleeved blue/blue
BitFenix Alchemy 8-Pin PCIe Extension 45cm - sleeved blue/blue
XSPC HighFlex Hose 3/8" ID, 5/8" OD, 16/10mm, 2m, Blue/UV Blue
Akasa FLEXA P8 40cm CPU power extension (AK-CBPW08-40BK)
Mayhems Biocide 10ml With PH Testing Kit
Mayhems Ultra Pure H20 Watercooling Fluid 1L
Mayhems Fine Silver Kill Coil
BitFenix Alchemy Molex Extension 45cm - sleeved blue/blue
XSPC PSU Bridging Connector (24 Pin)

Tackle_Berry · 5 Apr 2013 at 15:33

Xspc do a radiator mount stand that you may find useful, will only work with the XSPC AX rads though and you could always use the koolance quick disconnects so you can disconnect it for travel etc.

http://www.overclockers.co.uk/showproduct.php?prodid=WC-187-XS&groupid=962&catid=1523

Tackle_Berry · 5 Apr 2013 at 15:34

Also that hose is the wrong size for those compression fittings.

skylineboy · 5 Apr 2013 at 16:38

Ash2097 said:
Xspc do a radiator mount stand that you may find useful, will only work with the XSPC AX rads though and you could always use the koolance quick disconnects so you can disconnect it for travel etc.

http://www.overclockers.co.uk/showproduct.php?prodid=WC-187-XS&groupid=962&catid=1523

as above or try these (I know they are out of stock):

http://www.overclockers.co.uk/showproduct.php?prodid=WC-093-EK&groupid=962&catid=1523&subcat=1545

I had a thick 360mm rad screwed to the underside of my desk using a rad stand. Here is the stand I used:

OLDPHART · 6 Apr 2013 at 15:20

Hi just make your own stand or l have my rad hanging down the back of my desk mounted about 3" of the back for air to circulate, using two screws and two long tie raps.