new wc loop

[DataVampire]

Hardware Labs Black Ice Nemesis Radiator GTX 480 - Black Hardware Labs Black Ice Nemesis Radiator GTX 480 - Black £123.95
(£103.29) £123.95
(£103.29)
EK Water Blocks EK-D5 Vario X-TOP - Acetal (incl. pump) EK Water Blocks EK-D5 Vario X-TOP - Acetal (incl. pump) £89.99
(£74.99) £89.99
(£74.99)
EK Water Blocks EK-Supremacy EVO - Nickel EK Water Blocks EK-Supremacy EVO - Nickel £52.99
(£44.16) £52.99
(£44.16)
EK Water Blocks EK-RES X3 250 Reservoir EK Water Blocks EK-RES X3 250 Reservoir £51.98
(£43.32) £51.98
(£43.32)
Monsoon Chain Gun Fitting 1/2” x 3/4” Multi Pack – Red Monsoon Chain Gun Fitting 1/2” x 3/4” Multi Pack – Red £25.99
(£21.66) £25.99
(£21.66)
Corsair Fan, SP120 PWM High Pressure Fan 4 pin, Dual Pack (CO-9050014-WW) Corsair Fan, SP120 PWM High Pressure Fan 4 pin, Dual Pack (CO-9050014-WW) £25.00
(£20.83) £50.00
(£41.66)
Monsoon 19/13mm (OD 3/4) Rotary 90° - Matte Black Monsoon 19/13mm (OD 3/4) Rotary 90° - Matte Black £9.95
(£8.29) £39.80
(£33.16)
Monsoon 19/13mm (OD 3/4) Rotary 45° - Matte Black Monsoon 19/13mm (OD 3/4) Rotary 45° - Matte Black £9.49
(£7.91) £37.96
(£31.64)
Primochill Primoflex Advanced Tubing 19/13 - Clear Primochill Primoflex Advanced Tubing 19/13 - Clear


Next month finaly I can get a proper custom wc loop

I will be cooling the motherboard(using the inbuilt block) still not sure if its ok to use.

Just wandering if it looks ok what I am proposing to get.

I was going to go for the OcUK Tech Lab - W16 Watercooling Kit 480
but im not a fan of the raystorm blocks. or the 7.16 fittings/tubing, I think it will look silly in the 900d ?

So im hoping to get this sorted by next month. so guys what do you think

as I said I will be cooling my cpu and mobo only for now.

I have already got x2 packs of monsoon fittings on order. im hoping I have ordered the correct size. I think I have put enough 90 deg angles in from what I have seen I only need x4 cpu in and out and the cross chiller in and out. I will be ordering as about a couple of 45 deg fittings, but not sure if I will need them.

So im after some advice before I actualy order the kit.

I will also need advice of placement of the tube res and placement of the pump.

And am I better of fitting the rad at the top of the case or the bottom, I can also utilise a 360 rad I already have, and can either put that in the top or the bottom.

So I would love your help please guys.

Thank you