Newbie Memory Question

forever

forever

forever

Associate
Joined
10 Mar 2016
Posts
30
Just going through my motherboard advanced settings and it states my memory is running at 1600MHz, but i spec'ed 2400MHz, should it show the 2400 speed, has the wrong memory been put in?
 
Chipset
Northbridge Intel Skylake rev. 07
Southbridge Intel Skylake PCH rev. 31
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR4
Memory Size 16 GBytes
Channels Dual
Memory Frequency 799.5 MHz (1:12)
CAS# latency (CL) 16.0
RAS# to CAS# delay (tRCD) 16
RAS# Precharge (tRP) 16
Cycle Time (tRAS) 39
Row Refresh Cycle Time (tRFC) 313
Command Rate (CR) 2T
Uncore Frequency 3999.0 MHz
Host Bridge 0x191F
 
Memory SPD
DIMM # 1
SMBus address 0x51
Memory type DDR4
Module format UDIMM
Manufacturer (ID) Team Group Inc. (7F7F7F7FEF0000000000)
Size 8192 MBytes
Max bandwidth DDR4-2401 (1200 MHz)
Part number TEAMGROUP-UD4-2400
Serial number 01033572
Manufacturing date Week 09/Year 16
Nominal Voltage 1.20 Volts
EPP no
XMP no
AMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 11.0-11-11-27-38 @ 825 MHz
JEDEC #2 12.0-12-12-29-41 @ 900 MHz
JEDEC #3 13.0-13-13-32-45 @ 975 MHz
JEDEC #4 14.0-15-15-34-48 @ 1051 MHz
JEDEC #5 15.0-16-16-37-52 @ 1126 MHz
JEDEC #6 16.0-16-16-39-55 @ 1200 MHz
JEDEC #7 18.0-16-16-39-55 @ 1200 MHz
 
so that does not look like the memory i ordered? Which should be

MY-066-TG Team Group Elite 16GB (2x8GB) DDR4 PC4-19200C16 2400MHz

Dual Channel Kit - Black (TPKD416GM2400HC16D
 
So further update, did the bios upgrade and it showed 2400, i went back to the bios settings to put my overclock back, motherboard has a 20,40,60,80,100% overclock setting, when i did that to put my overclock to 40%, it brings the memory speed down!!
 
ah really, i thought it was too good to be true, i have a Gigabyte Z170-Gaming K3 motherboard running a i7 - 6700k, were can I find the details of what to change for my setup? thx
 
You must log in or register to reply here.
Back
Top Bottom